Header banner
Revain logoHome Page
πŸ”’ vintage lock clasp hook hasp - antique swing arm latch, plated bronze (2 pcs) - 33mm x 28mm - with screws logo

πŸ”’ Vintage Lock Clasp Hook Hasp - Antique Swing Arm Latch, Plated Bronze (2 Pcs) - 33mm x 28mm - with Screws Review

3

Β·

Very good

Revainrating 4 out of 5Β Β 
RatingΒ 
4.0
πŸšͺ Cabinet Hardware, πŸ”§ Hardware

View on AmazonView on Π―M

Media

(4)
img 1 attached to πŸ”’ Vintage Lock Clasp Hook Hasp - Antique Swing Arm Latch, Plated Bronze (2 Pcs) - 33mm x 28mm - with Screws
img 2 attached to πŸ”’ Vintage Lock Clasp Hook Hasp - Antique Swing Arm Latch, Plated Bronze (2 Pcs) - 33mm x 28mm - with Screws
img 3 attached to πŸ”’ Vintage Lock Clasp Hook Hasp - Antique Swing Arm Latch, Plated Bronze (2 Pcs) - 33mm x 28mm - with Screws
img 4 attached to πŸ”’ Vintage Lock Clasp Hook Hasp - Antique Swing Arm Latch, Plated Bronze (2 Pcs) - 33mm x 28mm - with Screws

Description of πŸ”’ Vintage Lock Clasp Hook Hasp - Antique Swing Arm Latch, Plated Bronze (2 Pcs) - 33mm x 28mm - with Screws

[Size] - Total Size: 33 x 28 x 10mm / 1.30" x 1.10" x 0.39" (L*W*H), come with matching screws, Screws Size is M2.5 x 12mm; One complete lock set has 4 mounting holes, Hole Diameter is 2.5mm / 0.1inch. [Mounting] - The Clasp has 2 parts. First, use screws to fix the part (with hook) on the correct position of box; Second, put the other part (with hole) on box and keep them locked well; Finally, fix the part (with hole) with screws. [Material] - Made of good quality zinc alloy, and the surface is coated with antique bronze, corrosion-resistant and anti-rust. [Applications] - Material thickness:0.2mm/0.008 inch. It is made of thin material, suitable for box, wine box and small cabinet with less strength and locking force. [Package] - 2pcs x Antique Box Right Latch, Some Screws

Reviews

Global ratings 3
  • 5
    2
  • 4
    0
  • 3
    0
  • 2
    1
  • 1
    0

Type of review

Revainrating 5 out of 5

Durable and elegant! snapped into place

I used this product to snap into place a custom woodworking project, it's strong enough to hold a 24" x 24" square piece of plywood upright with added weights!

Pros
  • Beautifully packaged
Cons
  • Hard to tell

Revainrating 5 out of 5

Works well with a 3/8 " cap.

I needed a fastener for a 3/8" box lid. The size of the top plate of the two screw hole fastener was 0.385 inch. The included screws held well to the edge of my 3/8 plywood.

Pros
  • Pleasant to use
Cons
  • So far so good

Revainrating 2 out of 5

Small and fragile. for accessories

The thing is small, very small. Installation was easy but the item is not solid metal. It is made from a composite material. The Pet Lock feature broke shortly after three days of use. Again, it's very small, so it's very difficult to roughly handle this item and still break it.

Pros
  • Handy thing
Cons
  • Negative impression