How to Assemble the Bravindew Storage Tent?
Assembling the Bravindew storage tent is a straightforward process that can be done in under an hour. Here are the step-by-step instructions:
Parts List
- Tent frame (pre-assembled)
- Tent cover
- Ground stakes (8)
- Ropes
- User manual
Instructions
- Clear the area where you want to set up the tent and lay out all the parts.
- Unfold the tent cover and drape it over the frame. The door flap should align with the door frame.
- Secure the cover to the frame using the Velcro tabs under the roofline. Go around the entire perimeter of the tent.
- Anchor the tent by staking down all 4 corners. You may need a mallet to drive the stakes into the ground.
- Tie diagonal rope between opposite stakes for added stability.
- Attach the door flap to the frame using the ties or Velcro strips.
- Double check that all connections are tight and secure.
Refer to the user manual if you have any issues during assembly. With two people, the entire setup should take under an hour. Make sure to pick a flat, level spot to ensure the tent remains sturdy.
Once assembled, the storage tent provides a spacious, weatherproof area for storing bikes, garden tools and outdoor gear. Just do routine checks for tightness, especially after high winds.
How to Clean the Bravindew Storage Tent?
Regular cleaning and maintenance will help prolong the life of your Bravindew storage tent. Here are some tips on keeping it looking new:
Supplies Needed
- Mild detergent
- Soft sponge or brush
- Garden hose
- Cloth or chamois
Cleaning the Fabric Cover
The tent cover can be cleaned by:
- Rinsing - Use a garden hose to rinse off any loose dirt or debris. Avoid high pressure streams.
- Scrubbing - Use a soft brush and mild detergent to gently scrub any stained or dirty areas.
- Rinsing - Thoroughly rinse off all soap residue with clean water.
- Drying - Allow the cover to completely air dry before storing to prevent mold growth.
Maintaining the Frame
Keep the metal frame corrosion free by:
- Checking for rust spots and immediately sanding and touching up with paint.
- Spraying frame with silicone lubricant every few months.
- Tightening any loose bolts or connections.
Storage and Ventilation
Allow the tent to dry out between uses. Leaving gear inside traps moisture. Make sure vents stay open when not in use. Check periodically for mildew odor which can indicate dampness.
With proper care and cleaning, your Bravindew storage tent can maintain its good looks for many seasons. Always refer to the product instructions for the manufacturer's cleaning recommendations.
How to Waterproof the Bravindew Storage Tent?
The Bravindew storage tent is designed to be waterproof and weather resistant. However, you can add extra protection and improve waterproofing by:
Using a Seam Sealer
Seam tape is applied by the manufacturer, but an extra waterproof sealant along the seams will help.
- Apply sealant along floor seams and any sewn seams on the roof or sides.
- Allow sealant to fully cure for 24-48 hours before use.
Re-Waterproofing the Fabric
Over time, the tent fabric can lose its water repellency. Restore it by:
- Cleaning the cover first with a tent cleaner and rinse well.
- Apply a tent waterproofing spray, using light, even coats.
- Allow the waterproofing to fully dry before folding up the tent.
Using a Rainfly
Add an extra waterproof barrier with a polyethylene rainfly:
- It should be slightly larger than the tent to provide full coverage.
- Anchor it above the tent using the provided attachment points.
- Make sure water drains off the fly and away from the tent.
Proper Setup
Prevent leaks by:
- Completely sealing all zippers, doors and floor seams.
- Anchoring the tent securely and taughtly to the ground.
- Applying seam sealer to the floor and rainfly if needed.
With some basic maintenance, you can easily keep your storage tent waterproof for seasons of use.
Another interesting products
12 Review
How to Anchor the Bravindew Storage Tent?
Properly anchoring the storage tent is key to keeping it secure in windy conditions. Here are some tips:
Choosing the Location
- Pick a flat, level spot clear of debris.
- Avoid set up under trees or near structures that could damage the tent.
- Face the door away from the prevailing wind direction.
Staking the Corners
Use the provided metal stakes to anchor each corner:
- Use a mallet to drive stakes vertically 12-18 inches into the ground.
- Leave 2-3 inches of the stake protruding from the soil.
- Secure the looped guy ropes or cables over the exposed stake.
Using Sandbags
For concrete and asphalt surfaces, use sandbags instead:
- Fill bags half full and tie off the end.
- Place a sandbag over each corner guy rope.
- Partially burying them helps weigh them down.
Cross Anchoring
Add cross anchoring for max stability:
- Tie rope diagonally between opposite stakes.
- Drive extra stakes midway along each side.
- Attach additional guy ropes to these stakes.
Checking Tension
Make sure all ropes and straps are:
- Pulling corners and roof taut.
- Tight enough so tent doesn't flap in wind.
- Loose enough for tent to flex and prevent tearing.
Proper anchoring prevents damage and keeps your stored items safe, even in high winds.
How to Store Bikes in the Bravindew Storage Tent?
The Bravindew storage tent provides a spacious, weatherproof area for storing bikes. Here are some tips for keeping your bikes protected and organized inside the tent:
Prep the Bikes
- Clean and dry bikes before storing to prevent corrosion and mildew.
- Lube the chain and inflate tires to proper PSI for long term storage.
- Turn handlebars sideways and lower seats to save space.
Lift Properly
When moving bikes into the tent:
- Carefully lift by the frame to avoid wheel or drivetrain damage.
- Transport one bike at a time and walk slowly.
- Lay down padding such as a tarp or blankets to protect the floor.
Utilize Vertical Space
Use the full height of the tent by:
- Hanging bikes from the central support beam using heavy duty hooks.
- Investing in mounted wall racks to double capacity.
- Leaning bikes against each other in a circular pattern.
Organize Accessories
Store helmets, pumps, lights etc:
- On wall mounted shelves or storage bins.
- Hung on hooks or wall grids.
- In clear plastic sealed containers.
Maintain Security
- Lock tent door and secure all zippers when not in use.
- Block entrance with bike rack or shelf for extra barrier.
- Chain bikes together and lock to center anchor beam.
With some planning, the storage tent can accommodate all your bike storage and accessory needs.
How to Ventilate the Bravindew Storage Tent?
Proper ventilation helps control humidity and prevents mold/mildew growth in the storage tent. Here are some tips:
Use the Roof Vents
The tent comes with built-in vents along the roofline. Keep them open to:
- Allow warm air to escape through convection.
- Prevent condensation by allowing moisture to dissipate.
- Improve air circulation inside the tent.
Open Windows and Doors
Crack windows and doors open:
- When the tent is not in use for extended periods.
- On sunny days to air out the space.
- When humidity levels are high to improve airflow.
Use Exhaust Fans
Mount duct fans low on a sidewall to actively ventilate:
- They move stale moist air out and draw fresh air in.
- Help lower interior humidity levels.
- Can be thermostatically controlled for automatic operation.
Dehumidifiers
Use electric or desiccant dehumidifiers:
- To maintain relative humidity below 50%.
- Desiccants don't require power but absorb less moisture.
- Automatically draining units are best for continual operation.
Allow for Air Circulation
Leave space between stored items so air can move freely. Avoid overstuffing the tent interior.
With the right ventilation techniques, the storage tent can maintain an optimal environment for protecting your valued possessions.
How To Set Up Bravindew Storage Tent For Bike Storage?
Setting up the Bravindew Storage Tent for bike storage is a quick and easy process. Here are the steps to follow:
- Unpack the tent and lay out all the parts.
- Connect the continuous fiberglass rods to form the tent frame.
- Place the tent cover over the frame and secure it with the provided straps and buckles.
- Choose a flat and level surface in your garden or backyard to set up the tent.
- Use the included anchors to secure the tent to the ground.
- Once the tent is securely anchored, you can move your bike inside and lock it up for safekeeping.
With these simple steps, you can have your Bravindew Storage Tent set up and ready to use in no time.
What Are The Dimensions Of Bravindew Storage Tent?
The dimensions of the Bravindew Storage Tent for bike storage are 74 inches wide, 37.8 inches deep, and 75 inches high. The tent is designed to be space-saving and can fit two adult bikes with spare space, long-handled garden tools, outdoor toys, and other items. The chamber height is 6.3 feet.
What Is The Weight Of Bravindew Storage Tent?
The weight of the Bravindew Storage Tent for bike storage is 12.1 pounds or 5.45 kg. The tent is designed to be portable and easy to move around, making it a convenient storage solution for your garden or backyard.
