πͺ Cutting Tools
3 Review
Down cut spiral provides perfect top surface. Up cut spiral clears chips fast and provides perfect bottom surface. Package Weight : 0.45 pounds. Package Dimensions: 8.636 L x 0.177H x1.524W(centimeters).
3 Review
Molybdenum coated to run cooler and stay sharp longer. High grade 1060 carbon steel stronger than any other auger on the market. Molybdenum coating acts as a dry lubricant to prevent clogging and eject chips faster. The coating acts as a dry lubricant to prevent the cutting edge from annealing. Machined on a true center to minimize run out and reduceβ¦
Read more about this product
3 Review
Precision ground from one piece of high speed steel with no weak welds or crimps. 1.9 to 2.32 inches overall length gets into tight spaces. Standard 1/4 inch hex shank fits most quick change or regular chucks. Brad point tip for pinpoint accuracy when drilling wood.Individually packaged so you only pay for the bits you need most. Does not fit all chucksβ¦
Read more about this product
3 Review
High Speed Steel for general purpose drilling in a variety of materials. Jobbers Length Drill - most common overall length. 118 -Degree point. Made in the U.S.A. 1/16-Inch - 1/4-Inch by 64ths drills with round Select-A-Drill plastic index.
3 Review
Set of 29 heavy duty jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments. Cobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials. Gold oxide finish lubricates the drill bit and provides wear resistance. Self-centering 135-degree split point penetrates hard material withoutβ¦
Read more about this product
3 Review
Custom Bosch carbide β for durability in heavy-duty applications. Square 25-tooth carbide head β designed for use with a tamper plate shank. Works with HS1927 tamper plate shank β for use in SDS-max hammers. Works with HS1827 tamper plate shank β for use in spline/round hex hammers. Works with HS1527 tamper plate shank β for use in 3/4 In. hex hammers.
3 Review
Set of 115 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments, letter sizes A to Z, and wire sizes #1 to #60. High-speed steel (HSS) provides hardness for wear resistance. Uncoated (bright) finish has no additional surface treatment or coating. 118-degree conventional point for a range of drilling applications. Meets ANSIβ¦
Read more about this product
3 Review
This product the Masonry Drill Bit is a no brainer to use. This product is a high in performance. This product is manufactured in United State of America. 17" length, 1/2" diameter. Hole in (TOP) center of .32 rounded threaded flute makes it easy to pull RG-6 coaxial cable with connector press to the coaxial cable for faster installation through wallsβ¦
Read more about this product
3 Review
HSS Spiral Drill Bits, 3.5mm. Pack of 10 replacement bits for use with reusable Centrotec shank (493422). Precision-ground HSS steel stays sharp longer for precise hole drilling and a long service life. Tip grind and flute design are ideal for drilling into wood, metal and plastic. Designed for use with reusable Centrotec shank, but can be usedβ¦
Read more about this product
3 Review
Short length drill bit offers rigidity to reduce tool deflection and breakage. Cobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials. Gold oxide finish lubricates and provides wear resistance on ferrous materials. 135-degree split point penetrates hard material without a pilot hole and producesβ¦
Read more about this product
3 Review
2 Flute design makes these ideal for plung cutting when chip removal is not a problem. High Performance for working on Stainless Steel, Titanium and high temperature alloys. Made of extra-fine grade carbide for ultra high transverse rupture strength. Uncoated Tools feature just the base substrate without any additional treatment or coatings and areβ¦
Read more about this product
3 Review
Carbide tip allows for greater heat and wear resistance than bi-metal. Provides 10 times greater tool life on abrasive materials. Ideal for plumbing, marine and aircraft applications. Package Weight: 1.1 pounds.
3 Review
High-speed steel (HSS) containing vanadium is a good combination of toughness and high red hardness, for use on drilling through hard substances. 118-degree with improved geometry, for assisting in performance in general drilling applications. Uncoated (bright) finish, for use with a wide range of drilling materials. Jobber-length, for a wide range ofβ¦
Read more about this product
3 Review
Premium high speed steel router bits are precision ground for sharp cutting edges for smooth uniform cuts. Heat treated and tempered to eliminate bending or breakage under normal usage. For dado box joint tenon mortise tongue and groove style cuts. 1/4" shank fits all standard routers.
3 Review
The product is a MM 1PC 1-5/8" Hole Saw. Purpose of use for Power Tool Accessories, hole-saw-sets. Manufactured in China.
3 Review
Product OverviewThe Lit Freud DHS2500CT Carbide Holesaw is a high-performance tool designed for efficient cutting in various materials. With its 2-1/2" (64mm) carbide-tipped blade, this holesaw delivers precise and clean cuts, making it an indispensable accessory for professionals and DIY enthusiasts alike. Whether you're working on woodworking projectsβ¦
Read more about this product
3 Review
Provides a smooth cut, with minimal tendency to bite or snag on contact with irregular surfaces. Constructed of hardened steel and abrasion resisting high speed steel teeth with a tough alloy body and cap. 5-1/2 teeth per inch/25mm make this Saw ideal for thinner gauge material. Cutting depth of 41 mm (1.5/8β).
3 Review
The product is 1-1/2" 1PC Hole Saw. Easy to use. The product is manufactured in China. Cuts extremely hard abrasive materials. Cutting edge of tungsten carbide particles bonded to alloy steel back. High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting.
3 Review
1/2" straight shank to Jacobs taper 4 arbor. The arbor is an intermediary gripping element between the drill chuck (type CKS. SP and SPX) and the spindle of the machine. Llambrich arbors are totally hardened and precision ground, ensuring a close fit. Maximum concentricity.
3 Review
RU5125CB. Chipbreaker Up Cut Spira. Industrial Quality.