πͺ Hole Saws & Accessories
1 Review
SUPERIOR MATERIALS: High Speed Steel (HSS) Bi-metal heavy duty steel hole saw set was built tough for repeat use, 8mm thick hole saw base and HSS hole saw teeth, durable and anti-abrasive. SMOOTH CUTTING: Non-binding clean edge design make STARVAST hole saw blade cuts smooth and fast. WIDE APPLICATIONS: Covers most popular hole saw sizes on the marketβ¦
Read more about this product
1 Review
1-3/8-Inch depth. Use standard or SDS shank arbors. Works in rotary and SDS hammer mode, works forward and reverse. Drilling a hole through concrete block takes less than 7 seconds. Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.
1 Review
Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws. Nickel plating on these bits maximizes your tools life with great resistance to corrosion. Side holes allow for easy slug removal after drilling. Suitable for cutting accurate holes on glass, ceramics, porcelain, ceramic tileβ¦
Read more about this product
1 Review
2 1/8-Inch holesaw. Designed to quickly and cleanly cut precise holes in ceramics, bricks, slate, laminate, fiberglass, and hardwood. Provides an impressive combination of strength, cutting power and durability. 4 precision ground carbide tips per-Inch. Equipped with vertical slots for easy core removal.
1 Review
The fishing line is made from Japanese raw materials. Possesses high discontinuous characteristics, it is steady against wear. Due to the transparency of the line, it is practically invisible in the water, which increases the efficiency of the assembled equipment. The line works well on spinning tackle and on light feeders. In winter, the line hasβ¦
Read more about this product
1 Review
A compact but roomy nightstand for decorating your living room. Two hinged solid doors, behind which there are three compartments. Open compartment and two drawers on metal rails. Metal handles. The pronounced wood structure of the facades is edged with black frames with an imitation of the metal surface. This design, combined with comfortable metalβ¦
Read more about this product
1 Review
Including 1", 2-1/8" Hole Saws, 3/8" Hex Arbor; M2 Pilot Drills, Adaptor, Adjustable Guide Template. 1-3/4 Inch Cut-depth allows for deep cuts; Easily cuts through materials in one pass; Not using for cutting in brick, concrete, tile, marble, etc. Quality HSS M42 Cobalt Precision Vacuum Hardened 4/6 TIP teeth increase abrasion resistance, roughness, andβ¦
Read more about this product
1 Review
Progressor tooth design cuts faster and lasts longer in wood and metal applications. Reinforced shoulder for added strength and longer life. 8 percent cobalt alloy for longer life and higher heat resistance. Works with standard or Quick Change mandrels (Quick Change requires adapters).
1 Review
π 15 Sizes Diamond Hole Saw: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 26mm, 28mm, 30mm, 40mm, 50mm. Diameter of triangle bit: 6mm, 8mm, 10mm, 12mm. Hole saw set include 15 holes saw drill bits + 4 triangle bit+1 hole saw guide clamp+1 screwdriver. Buy as a set and save over 80 percent. π Quality Material: Our diamond drill bits are madeβ¦
Read more about this product
1 Review
β High Speed - High-speed steel and stainless steel hole saw drill, sheet metal reamer for stainless steel, iron, aluminum, wood and various types of pipes. β Cut In Seconds - A special heat treatment, sharp edge, high strength, cuts quickly, precise holes in Steel, Stainless Steel, Iron, Copper, Brass, Aluminum, Fiberglass in Seconds. β Great Valueβ¦
Read more about this product
1 Review
Product Type: Tools. Package Dimensions: 5.6 L x 8.6 W x 15.5 H (centimeters). Country of Origin: China. Package Weight: 0.141 kilograms.
1 Review
Product Type: Tools. Package Dimensions: 7.4 L x 8.1 W x 10.4 H (centimeters). Country of Origin: China. Package Weight: 0.363 kilograms.
1 Review
Hole saw arbor extension bar. Suitable for use with any arbor with a 7/16-inches shank size. 12-inches length.
1 Review
Aggressive material penetration and swarf clearance, removing the need to carry a constant and variable pitch Hole Saw. Constructed of hardened steel and abrasion resisting high speed steel teeth with a tough alloy body and cap. The complete Multi-Purpose Saw. Cutting depth of 51 mm (2β). Starrett designed Tooth geometry resulting in huge improvementsβ¦
Read more about this product
1 Review
M42 cobalt bi-metal cutting edge provides shock resistant teeth and resists tooth slippage. 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration. 3/16-Inch back plate eliminates need for drive plate.
1 Review
Aggressive material penetration and swarf clearance, removing the need to carry a constant and variable pitch Hole Saw. Constructed of hardened steel and abrasion resisting high speed steel teeth with a tough alloy body and cap. The complete Multi-Purpose Saw. Cutting depth of 51 mm (2β). Starrett designed Tooth geometry resulting in huge improvementsβ¦
Read more about this product
1 Review
Hole saw set includes nine high-speed hole saws, two arbors, and one 1/4" arbor adapter and is used with an electric drill (sold separately) to cut circular holes. M42 bi-metal saws can be used to cut holes in wood, plastic, aluminum, brass, cast iron, and stainless steel. Saw blades have a variable pitch of 4-6 teeth per inch for faster cutting than aβ¦
Read more about this product
1 Review
Product Name: Hole Saw; Material: Metal. Hole Diameter (Approx.): 18mm / 11/16"; Total Length: 50mm / 2". Shank Size (Approx.): 6mm x 20mm / 1/4" x 13/16" (D * L ). Weight: 14g. Package Content: 1 x Hole Saw.
1 Review
Sourcingmap. Cutting Diameter: 21.5mm/0.846''; Shank Width: 7mm/0.276''. Hole Saw Depth: 15mm/0.59''; Twist Bit Diameter: 5mm/0.2''. Total Length: 72mm/2.835''. Material: Metal; Color: Gray; Net Weight: 57g.