🚰 Hydraulics, Pneumatics & Plumbing
3 Review
[NBR O-ring]-NBR with good mechanical properties and high wear resistance. It has good resistance to many petroleum, grease, hydraulic oil, alcohol, mineral oil and grease. Nitrile rubber is susceptible to acetone, ether, ester, ozone, sunlight and weathering, so it should not be used in ozone-producing motors, welding equipment, or applications exposed…
Read more about this product
3 Review
Product CharacteristicsThe Silicone O-Ring, now available as the Sterling Seal ORSIL210X10 Number 210 Resistance, is a high-performance sealing solution designed to withstand extreme temperature ranges from -90°F to 500°F (-68°C to 260°C). It is the perfect choice for a wide range of applications in the field of lab filters, hydraulics, pneumatics, and…
Read more about this product
3 Review
90-degree elbow for connecting pipe at an angle. Fitting connects to schedule 40 PE pipe on both ends. PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons. Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately). Meets ASTM D 2609 standards for plastic insert fittings…
Read more about this product
3 Review
Tube O.D. size: 1/4". Thread size: 7/16-20. Plastic compression sleeve. Use with copper, brass, aluminum, or plastic tubing. -65 degree F to +250 degree F temperature range.
3 Review
Product Type —— Adapter(1/4" NPTx 3/8" NPT) with protective case,for industry connecting pipes or fittings with different end types, diameters, or materials. Product Material —— Forging of 304 stainless steel strength and resistance to corrosion. Working Temperature —— Temperature range from -868 to 1472 degrees F/-500 to 800 degrees C. Maximum Pressure…
Read more about this product
3 Review
Size: 1/2" NPT Female x 1/2" NPT Male (National Pipe Taper female to male threads). Matertial: Made of heavy duty stainless steel 304, durable, strong and corrosion resistance. Suitable for connecting two thread pipes at a 90°angle to connect, terminate, control flow and change the direction of piping. Great designed for water filters. Size fits…
Read more about this product
3 Review
DO YOU WANT TO SET YOUR WATER BOILER AT 140° F SO YOU CAN KILL HARMFUL BACTERIA BUT ARE WORRIED ABOUT CHILDREN GETTING SCALDED? TEMLOCK thermostatic mixing valve allows you to set your water heater at 140° F. Then simply set the valve at the safe temperature of around 120° F. DO YOU WANT THE WATER TEMPERATURE OF YOUR SOLAR HOT WATER SYSTEM TO BE MORE…
Read more about this product
3 Review
Plug for closing the end of a pipe or fitting. Male NPT threads for connecting to female NPT threaded pipes. PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal. Maximum operating temperature of 140 degrees F. Meets ASTM D1784 and D2466 standards for quality assurance, and certified by NSF…
Read more about this product
3 Review
Sanitary Spool Tube fits Tri-clamp: 1.5", Ferrule OD: 50.5MM. Sanitary Spool Tube Length: 18 Inch ( 458mm ), Sanitary Spool Tube OD: 1.5 Inch. Round metal tubing for transport of fluids and gases in chloride environments. Made of Stainless Steel 304 material, Internal and External Polished, 100% suitable for sanitary purpose, seamless construction for…
Read more about this product
3 Review
Upgrade Version: barb OD was upgraded to 14mm, can provide tightly connection with 1/2" ID tubing. Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. Temperatures range from -40 to 160 F. 90-degree elbow for connecting hose to threaded pipe at an angle. Fitting connects to hose on one end and…
Read more about this product
3 Review
45-degree street elbow for connecting a male-ended and a female-ended pipe at an angle. Female National Pipe Taper (NPT) threads on one end and male NPT threads on the other for connecting pipes with different ends. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperatures range from -53 to 121…
Read more about this product
3 Review
Concentric reducer fitting to connect two pipes of different diameters that are along the same pipe axis. Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access. nce to corrosion and high temperatures. Ferrule Size 268MM fits 10" tri clamp. Ferrule Size:64mm 2" ferrule fits 2" tri clamp.
3 Review
PRESSURE RELIEF VALVE - 3/4" Line Connection, 75 PSI. FOR COLD WATER ONLY - Pressure relief valves are recommended for all cold water system installations. PROTECTION - protect against damage to plumbing system, piping and pressure tanks. ". DIMENSIONS - 3/4"" Male thread for screwing into tank/tank tee. 1/2"" female thread for accepting plumbing…
Read more about this product
3 Review
Package includes 12 pack 16mm ball valve, good tool for gardening planting. The drip valve is made of durable and sturdy plastic material, Long service life. These irrigation valves are ideal for 16mm drip tubing. The irrigation valve can save both water and energy, switch valves for use with 5/8 inch drip irrigation tubing, helping your adjust water to…
Read more about this product
3 Review
World leading dripless mechanical face seal for marine applications. Ideal replacement for packing glands and lip seals in marine or industrial environments. Highly durable, low maintenance and cost-effective solution. Certified by ABS, BV (or Bureau Veritas), RINA, and US Coast Guard approved. Manufactured in the USA.
3 Review
Package dimensions: 7.62 cms L x 2.54 cms W x 2.54 cms H. Package Quantity: 1. Product Type: MECHANICAL COMPONENTS. Country Of Origin: United States.
3 Review
High Flow 5/8" Body, 3/4" NPT Thread. Interchangeable with 5/8" Body ISO 16028 Flat Face Couplers (5/8" Body Couplers measure 1.65" across the face of the female Coupler). Heavy Duty Design with 5076 PSI Rating, Max Flow Rate: 39 GPM. Locking sleeve helps prevent accidental disconnects. Valve design that allows for a minimal pressure drops and one hand…
Read more about this product
3 Review
30PCS– Assorted 1/4" to 1/2" Black Vinyl Round End Cap Cover for Pipe Plastic Tube Hub Caps Tubing Bolt Screw Rubber Thread Protector Safety Cover 3 sizes: 1/4"(10pcs), 3/8"(10pcs), 1/2"(10pcs),Total 30pcs. Fits OUTSIDE diameter of sizes OD 1/4" to 1/2" round tube or pipe.VC Series Vinyl caps are extremely flexible and Pliable. Can stretch up to 1/16"…
Read more about this product
3 Review
Chemical Resistant. Self Lubricating. Temperature -200 to 540 Degree F. Heat Dissipating. Durable and Compressible