🚰 Hydraulics, Pneumatics & Plumbing
3 Review
3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough. GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection. This creates waterproof and long-lasting insulation. EASY TO USE - Simply slide heat shrink tube over your connection point…
Read more about this product
3 Review
Material: Brass. Connections size: 3/4" x 3/8". Contains no lead. NOT FOR POTABLE WATER. Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Temperatures range from -40 to 160 F. 150 PSI…
Read more about this product
3 Review
★ 100% new and high quality material. ★ Can be connected with 1/2" Hose ID & 1/4" Hose ID. ★ Can be easily connected with tubing hose line. ★ Smooth surface and inner wall, durable Light and Small. Exquisite craftsman makes it safe and reliable. ★ Wide range of use: Suitable for applications in pharmaceutical,fooand beverage,laboratory,chemical…
Read more about this product
3 Review
Main color: black & red. Shrink Ratio: 3:1, Round diameter: 3/4'', Length: 1.22M(4Ft). Rated voltage: 600V. temperature range: -55C to +125C,Beginning shrinking temperature: 70C,Completely shrinking temperature: 125C.
3 Review
Union fitting for connecting and disconnecting two pipes more easily than with couplings. Socket openings on both ends for connecting two male pipes. PVC for strength and resistance to chemicals and corrosion, and an EPDM seal for resistance to oil, water, and some solvents. Maximum operating temperature of 140 degrees F. Meets ASTM D1784 and D2467…
Read more about this product
3 Review
Fits 100 Feet of 3/8" Air hose, 150 Feet of 1/4" Air Hose, or 50 Feet of 1/2" Air Hose. Heavy Duty Thick Steel Construction. Wall Mountable. 1/4" Female NPT Brass Air Inlet.
3 Review
Material: Brass. Connections: 3/8" x 5/16". Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Temperatures range from -40 to 160 F. 150 PSI maximum working pressure. Contains no lead…
Read more about this product
3 Review
[ MATERIAL ] High quality solid brass, firm and durable, brass is corrosion resistant. This pipe fitting can apply to water, air, gas, oil and fuel. [ HOSE CLAMP ] Worm Gear Hose Clamp with 8mm width adjustable stainless steel band. The extended band liner to protect the hose from damage caused by extrusion. Connection fasteners for water, oil, gas…
Read more about this product
3 Review
FKM sanitary gasket fit standard 1.5" tri-clover or tri-clamp fittings, apply to 150 Mesh. Outer Diameter : 50.5mm / 2". Made from Food Grade Level material: FKM. Temperature Range: -15F - 400F. Highly resistant to Vacuum, Most Acids / Chemicals, Halogenated Hydrocarbons, Di-Ester, Lubricants, Petroleum Oils / Fuels, Silicone Oils / Greases.
3 Review
Transfers Water from Indoor Water Supply to Outdoors; Either as an Independent Faucet or as a Hose Connector. Durable Chrome-Plated Body Offers Superior Corrosion Resistance; Lead Free Certified. Extended-Hub Handwheel Allows for Easy On/Off Operation with various pressure settings. Certified ANSI/NSF Standard 61-9/372; Cold Working Pressure 125 PSI…
Read more about this product
3 Review
Hex bushing for connecting pipes of different sizes. Male and female National Pipe Taper (NPT) threads for connecting two pipes. Made from lead-free brass for higher corrosion resistance than steel. Relative softness of metal enables tighter seals and greater ease in installation. Manufactured to standards NSF/ANSI 61, AB1953, and S.152 for lead-free…
Read more about this product
3 Review
Nickel plated brass fitting guards against corrosion. 175 psi maximum working pressure. Double O-ring compression style fitting, tubing can be removed from fitting if needed. Use only with Maxline 3/4-Inch system.
3 Review
Made of stainless steel 304, heavy duty, durable and corrosion resistance. Fit 3/8" outer diameter tube. Fittings for connecting and extending stainless steel, copper, rigid and semi-rigid plastic tubing. Maximum working pressure of 600 psi. Temperature range from -100 to +660 degrees °F.
3 Review
Filter Plate Connection Size: Tri Clamp 2Inch. Filter Plate Hole Size: Multiple 6MM Filter Holes. Filter Plate Height: 2 Inch. Made of stainless steel 304 for resistance to corrosion and high temperatures. Holds Filters/Mesh In-Line Without Risk of Breaking.
3 Review
It has a maximum working pressure of 10,000 PSI, which can be used for all 10-ton applications. 10,000 PSI air/hydraulic foot pump requires 40-150 PSI air pressure. Designed to be used with single acting cylinders. Flow rate 42 cu. in. with no load, 8.5 cu. in. with load. This foot pump is powerful and compact and does not take up much space. It is…
Read more about this product
3 Review
Package Weight : 0.2 pounds. Country of Origin : China. Part number: 6506-06-06. Shape: Adapter.
3 Review
1/2" Body, 1/2" NPT Thread, Ball Valve, Female Coupler. Most common couplers used in the Agriculture, Construction and Logging industries. Harden Steel with 3675 Max PSI Rating. Max Flow Rate: 23.78 GPM. Interchangeable with all ISO 5675 series including ball seat valve, poppet seal, push-pull couplings, and ISO 7241.
3 Review
1" Hose ID x 3/4" Male NPT Brass Barb Fitting. 150 PSI maximum working pressure, -40° to 160° Temperature Rating. PLEASE NOTE, 3/4" NPT MEASURES 1.050" OUTSIDE THREAD DIAMETER IN LINEAR INCHES. Backed by EDGE Industrial full manufacturers warranty. NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.
3 Review
2 Pack - Size: 1/2" Body, 1/2" NPT Thread, Ball Valve. 3600 PSI Rating. Hardened Steel Plugs. Max Flow Rate: 14.5 GPM. Interchangeable w/ Parker/Pioneer 4000 Series (8010-4 Male), Faster NV NS, Safeway S-20, ISO 5675, ISO 7241.