🚰 Hydraulics, Pneumatics & Plumbing
2 Review
Grex adaptor. One end with 1/4 inches male threads. Other end with 1/8 inches female threads. Precision machined of metal for durability. Electro-plated for a smooth easy to clean surface.
2 Review
Shielded couplings are electrometric sleeves with stainless steel shields for use in joining cast-iron, schedule 40 plastic, and steel to copper dwv pipe. Made from high quality materials and highly durable. Manufactured in United States.
2 Review
Joins 3/8" NPT female ends through a 1" bulkhead opening. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. For use in air brake system assemblies.
2 Review
[Size] - 45mm Outside Diameter, 38mm Inner Diameter, 3.5mm Cross-Section Diameter. [Hardness] - 70A Durometer (Shore Hardness) for resistance to penetration. [Nitrile Rubber] - Standard Nitrile Butadiene Rubber with a wide temperature range from -4°F (-20°C) to 212°F (100°C). [Application] - Widely used for pressure washer, filter, pump, water hose…
Read more about this product
2 Review
Product size: NPT 1/2'';Working voltage: DC 12V; Wiring diagram: CR2-01. Working current: less than 500mA;Open/Close time: less than 5s. Life time: 70000 times(testing pressure is 0.4Mpa, medium is water). Valve body material: Brass; Actuator material: Engineering plastics. Environment temperature: -15-50°C(-59-122°F); Liquid temperature…
Read more about this product
2 Review
*Bolt Caps Size: Suitable For Round Pipes Or Tubes With 22mm (0.87 Inches) Outer Diameter, Tightly Fitting The Surface Of Body. *Screw Caps Application: The Push-In End Cap Is Very Suitable For Round Tubing, Thread Set, Furniture, Table Foot,Fence Railing, Steel Door Rail Stopper, Rod / Rebar Or Wrought Iron Cover, Threaded Substitutes For Safety Of…
Read more about this product
2 Review
Union fitting for connecting and disconnecting two pipes more easily than with couplings. Socket openings on both ends for connecting two male pipes. PVC for strength and resistance to chemicals and corrosion, and an EPDM seal for resistance to oil, water, and some solvents. Maximum operating temperature of 140 degrees F. Meets ASTM D1784 and D2466…
Read more about this product
2 Review
✔【What You Will Get?】 – The hose clamp kit comes with totally 10 pcs hose clamps, enough for your spare and replacement in daily life around you house, garage, lawn and garden. ✔【Adjustable Size Range】 - The diameter of the stainless steel clamp is adjustable to suit different hoses: 27-51mm. ✔【304 Stainless Steel】- Made of heavy-duty high-quality 304…
Read more about this product
2 Review
MATERIAL: The straight fittings are made of nickel-plated brass for durability and corrosion resistance. SEALING: Double O-ring compression style ensures 100% sealing in high working pressure. Max working pressure: 300 PSI. INSTALLATION: Fast and easy way for tubing connection, no glue, soldering or crimping. The tubing also can be removed from fittings…
Read more about this product
2 Review
Valve size: NPT 1-1/2''(38MM);Rated Voltage: AC24V/DC12-24V; Wiring diagram: CR2-02. Working current: less than 1.5A;Open/close time: less than 12S. Life time: 70000 times(testing pressure is 0.4MPa, medium is water);Maximum working pressure: 1.0Mpa(145PSI). Environment temperature: -15~50°C(59-122°F);Liquid temperature: 2-90°C(35.6-194°F). Manual…
Read more about this product
2 Review
TYPE C CAMLOCK (CAM AND GROOVE) 4” FEMALE CAMLOCK X 4” HOSE SHANK. TYPE E CAMLOCK (CAM AND GROOVE) 4” MALE CAMLOCK X 4” HOSE SHANK. ALUMINUM BODY: CORROSION AND ABRASION RESISTANT, LIGHT WEIGHT. NBR (BUNA-N) SEAL, STAINLESS STEEL CAM ARMS. 100 PSI MAX PRESSURE – Quick Connect Hose Coupling
2 Review
FOR PIPE CONNECTION: This is a pneumatic quick connector that can be widely used for pipe connection and the use of different pneumatic components. ROTATED 360 DEGREES: The nozzle of the pneumatic quick connector can be rotated 360 degrees, which is flexible and lightweight. This pneumatic fitting tube connector is for straight through pneumatic air…
Read more about this product
2 Review
【Push into the design】 The simple push-in design connects to the tube and provides a firm connection without the need for additional sealing. 【Easy to use】 M10-inch straight pneumatic connector is small in size, easy to use, and has good performance. 【Not easy to rust】 The push-to-connect fitting is made of high-quality nickel-plated copper, which is…
Read more about this product
2 Review
ES10010-2A1 Stainless Steel Water Level Sensor;Max Contact Rating :10W. Max Switching Voltage : 100 DC;Max Switching Current : 0.5A;Max Breakdown Voltage : 220VDC;Max Carry Current : 1A. Put In Water Length: 100mm/3.9";Total Length: 116mm/4.6". Thread Dia(Approx) : M10;Float Ball Size: 26 x 26mm/1" x 1"(L*D);Cable Length : 35cm / 14". Max Contact…
Read more about this product
2 Review
Size:1/4 INCH Male NPT X 1/2 INCH Female NPT. Material: Made of 304 stainless steel, working temperature can be from -300°F to392°F. Function: Hex bushing for connecting two pipes or with different diameters. Package Include: 2 X Reducer Adapter. Notice: NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter
2 Review
SIZE - The aluminum round tubing is 10mm in outer diameter, 8mm in inner diameter, 1mm wall thickness, 300mm/12" in length. MATERIAL - Aluminum 6063 provides high corrosion resistance and excellent finishing characteristics, is easy to extrude and has good machinability. Aluminum 6063-T5 has high strength and high hardness. PERFORMANCE - Both surface…
Read more about this product
2 Review
【SIEZ】1/4 INCH MNPT X 1/4 INCH FNPT. 【MAX PRESSURE】Operating pressure: 150 PSI. 【METAL】Heavy Duty Brass,strong and durable. Brass for corrosion resistance, high temperature ductility and low magnetic permeability. 【TEMPERATURE RATING】Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F). 【NOTICE】NPT Thread Size is a Nominal Pipe…
Read more about this product
2 Review
SPICAL FEATURE: Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. FUNCTION: Adapter for connecting pipes or fittings of different thread types, brass is corrosion resistant and can be used in wet environments; it can also be used with grease, fuels…
Read more about this product
2 Review
Type: Barb Hose Reducing Splicer / Mender. Hose ID: 3/8" Hose ID: 1/2". Materies: BRASS. Net Weight: 18g/pc. Choosing products dimensions and quantities at column of size and colour seperately,price would be more favorable if choosing wholesale.