๐ถ Network Transceivers
3 Review
Product OverviewThe QSFPTEK 1.25 Gigabit SFP Module is a high-quality transceiver designed for compatibility with various networking devices, including HP J4859A/J4859C/J4859B switches, Supermicro equipment, and Netgear devices. This single-mode LC Mini-GBIC transceiver is widely used in fiber switches, routers, NICs, servers, and other fiber opticโฆ
Read more about this product
3 Review
This downloader is much better than red version. It use CH340C chip, added ESP8266 auto-download circuit, it is very convenient for user to download program, update firmware, debugging. It has RESET tact switch. It support Arduino IDE, Ai-thinker ESP8266 Flasher and Espressif FLASH_DOWNLOAD_TOOLS. No need connection, no need to press button, WiFi moduleโฆ
Read more about this product
3 Review
100% JUNIPER EX-SFP-1GE-SX COMPATIBLE SFP TRANSCEIVER: Designed, programmed and tested to work with compatible Juniper switches and routers to deliver dependable 1GbE connectivity. TECHNICAL SPECS: 1000BASE-SX | 1Gbps | Multi Mode (MMF) | LC Connector | 850nm | Digital Diagnostic Monitoring (DDM) | Distances up to 550m (1804ft). TESTED FOR OEM HOSTโฆ
Read more about this product
3 Review
๐ฉ This latest version esp-01s WiFi module with stronger signal and 1MB Flash Memory, it is upgraded from 512KB. ๐ฉ About program: Please choose "Generic ESP8285 Module" board in Arduino IDE to program it. ๐ฉ ESP-01s adapter's PCB layout has changed for an improvement in WiFi radio performance. Compatible with Ar duino. Support 3 modes: AP, STA, AP + STAโฆ
Read more about this product
3 Review
ใInsrtuction munualใ Please get the example link from the product description below. ใNRF24L01+ ModuleใHigh-performance wireless data transmission chip NRF24L01 +, an increase of high-power PA and LNA chips, RF switches, band-pass filters and other professional full bidirectional RF, making the effective communication distance has been greatly expandedโฆ
Read more about this product
3 Review
User Manual: Product Guide and Documentation Get. The nRF24L01+ is a 2.4GHz ISM band transceiver; Auto-acknowledge and auto-retransmit abilities. Range: 800+ meters line of sight, Weight: 13.28 g (0.468 oz). The module has 5V tolerant inputs which allows for direct connection of SPI pins to the A r d u i n o. We Have a Strong After-sales Service Teamโฆ
Read more about this product
3 Review
Mini size: It is nearly 50% smaller than the traditional converter. Fiber Port: 550-m SFP transceiver included (1.25G, multimode, 850-nm); RJ-45 Port: 10M/100M/1000Mbps, full/half duplex auto-negotiation, MDI/MDIX auto-crossover. Cable Type: UTP/STP Cat.5e for 100 meters. LED indicators for PWR, FX, 1000, LINK can dynamic feedback link connection stateโฆ
Read more about this product
3 Review
Designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Works at 100Mbps in Full-Duplex mode for both TX port and FX port. Supports auto MDI/MDIX for TX port and provides switch configuration of Force/Auto transfer mode for FX port. Extends fiber distance up to 1.2 mile (2km). Easy-to-view LED indicators provide status to monitorโฆ
Read more about this product
3 Review
1 x 1000BASE-T RJ-45 port. 1 x 1000BASE-SX/LX SFP slot. SFP slot accommodates multimode or single-mode modules. Auto-MDIX 1000BASE-T RJ-45 port supports full-duplex mode.
3 Review
Compatible with ESP-01 ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ESP-F. The board supports firmware one-click download function and adds programming.
3 Review
2 magnamole replacement magnetic caps^Red and Blue cap color^Cable diameter accommodation: Red 0.169" to 0.205" and Blue 0.230" to 0.295"^Used with CAT 5, RG6, RG6 TRI, RG6 QUAD cable^Includes 2 magnetic caps of each color.
3 Review
Lora1276 long distance wireless transceiver module. integrates Semtech RF transceiver chip SX1276. which adopts LoRa TM Spread Spectrummodulation frequency hopping technique. The features of long distance and high sensitivity (-139dBm) make this module perform better than FSK and GFSK module. This module is 100mW and ultra small size, widely used in AMRโฆ
Read more about this product
3 Review
Interfaces/Ports Details: 1 x LC 1000Base-SX. Media Type Supported: Optical Fiber. Fiber Optic Cable Standard: 62.5/125 ฮผm.
3 Review
Compatibility - for Netgear AXM762, Mellanox, ZTE, Ubiquiti, and other open switches. 10GBase-LR SFP+ Module - 10Gb/s data rate, single-mode, duplex LC connector, 1310nm wavelength, up to 10km transmission distance, DDM support. Easy to use & Durable - Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pullingโฆ
Read more about this product
3 Review
๐ก FLYPROFiber focuses on fiber optic trasceivers for 12 years. We produce high quality transceivers, every transceiver has been tested for 26 steps before shipping. ๐ก This 1000BASE SFP RJ45 Copper Module Cisco can be fully compatible with GLC-T/SFP-GE-T, Meraki MA-SFP-1GB-TX, Netgear, Ubiquiti, Supermicro, Linksys, QNAP, Unifi, Broadcom, D-Link, TP-Linkโฆ
Read more about this product
3 Review
Quality Assured & Tested Working. Press the button to enter AT mode. Master and slave, Two modes in one module; Use AT command to set as master or slave mode. Default baud rate: 9600; default pairing password: 1234; Default name: HC-05. Doesn't work with iOS.
3 Review
Quality Assured & Tested Working. Bluetooth V2.0 protocol standards. As slave mode only; Can pair with bluetooth dongle and master module. Default baud rate: 9600; default pairing password: 1234; Default name: HC-06. Doesn't work with iOS.
3 Review
10/100/1000Mb/s Multi-Rate Auto-Negotiation, distance up to 100-meter. Compatible with Juniper, Every transceiver is individually tested on full range of Juniper Networks equipments and we will make sure 100% workable with Juniper Devices. A convenient way to add a copper connection to an SFP type switch that would typically be used for fiber SFPsโฆ
Read more about this product
3 Review
SN65HVD230 can be used under high interference environment. The device has the ability to send and receive good at different rates. Fully compatible with ISO11898 standard;High input impedance, allowing 120 nodes; Low current standby mode, the typical current of 370ฮผA; Signal transfer rate up to 1Mb / s;. Thermal protection, open circuit failureโฆ
Read more about this product
3 Review
Sure, here's the additional description for the product "Gigabit Fiber Media Converter, 10/100/1000Base-Tx to Gigabit SFP Slot (Including a SFP EX Transceiver), Up to 40KM" from the category "Network Transceivers":htmlCharacteristics:The Gigabit Fiber Media Converter is a versatile networking product that allows seamless conversion fromโฆ
Read more about this product