Review on 👞 Efficient 10-Tier Over The Door Shoe Organizer with Customized Metal Hooks - Space Saving Solution for Closet, Pantry, and Kitchen Accessory (Silver Gray) by Uriel Arocha

Not a bad buy. Holds quite a lot of shoes, which saves a lot of space. Ideal for those who have an apartment. A few tips for assembly instructions. It takes some common sense to put it together. But it's not that hard. 1) You will need an electric or manual Phillips screwdriver. I did it with the usual Philips 2) In the instructions for step 1 there is an error that you need 2 parts C1 and 10 parts C2. It's a type because the front says you should have 10 pieces C1 and 2 pieces C2.3) The instructions don't mention this. However, if you place pieces E at the ends of pieces A1 and A2. Make sure the ends of part E look the same and fit into part G or H as if you're already hanging it on a door or wall. if you miss it Unscrew ends A1 and A2 and gently pry off parts E with a flat head. I wouldn't recommend pliers because of the cheap plastic. I tried it first and it just breaks down plastic with ease. 4) I assembled this myself, doing one side at a time. Just screw in one side just enough to hold one end of C1 and C2 and do the same on the other side. Make sure sides C1 and C2 fit into square slots A1 and A2. After both sides are screwed loosely. Tighten one side while keeping the sticks as close together as possible. Then do the same with the other one. It will take you about 30 minutes and an hour to assemble.