Review on 🔥 Zippo 65826 Single Torch Butane Lighter Insert - Chrome Finish by Azeem Mendez

Dear Universe! Thank you for this great feedback! Maximum height, couldn't sustain the flame! This is after venting , refilling etc. I have the mod but for the record WHAT: This is a 3 minute fix All you need is a small Phillips and flat head screwdriver 1 Remove the 2 bottom screws 2 Remove the bottom one Cover.3 Remove the small ring on the flame adjustment knob.4.Remove the brass plug.5.Turn the flame adjustment knob counterclockwise a full 360°.6.Check the lighter and increase the flame height as desired.7.Set set the limiter to the maximum value (far left) 8. Reset everything else IS: This is a 3 minute solution All you need is a small Phillips and flat head screwdriver here. 1. Unscrew the 2 bottom their screws. (SAME, YES) 2. Remove the bottom cover. (SAME SAME, YES) 3. Remove the small ring on the flame adjustment knob (SAME SAME BUT ONLY TEMPORARILY)4. Remove the brass stop. (NO, JUST HOLD SMALL TONGUE SO YOU CAN ROTATE A LITTLE FURTHER, WORKS FOR ME!) 5. Turn Flame Adjuster Knob counter-clockwise a full 360°. (NO, SHOULD NOT) 6. Check the lighter and increase the flame height as desired. (WORKS NOW, GOOD FOR ME!) 7. Reset limiter to max (far left) (NOT SURE HOW IT IS ON/OFF. I CAN'T) 8. Reinstall everything else. (YES SIR)