Header banner
Revain logoHome Page
Adam Koakowski ᠌ photo
1 Level
337 Review
0 Karma

Review on Water Cooling System for Thermaltake TH240 ARGB CPU, Black/ARGB by Adam Koakowski ᠌

Revainrating 4 out of 5

A good product at a good price, I advise you to try it.

In * 5k with a guarantee but there is no lga1700. It’s even a shame that I took it here for 5200, but then it was 800 more expensive there. APALTEK 2022 is flowing. Received on time. The packaging is ok. I will add a review as it works for a while. In terms of temperatures, everything is not bad, although the voltage above 1.3 no longer keeps cpu + fpu in Hades, it stupidly heats up above 95 and the computer is cut down. My 5600x in this situation takes no more than 4.7

Pros
  • Works. Includes a hub for two fans in one cpu fan. All cables are braided. I would say overkill, but you get a more reliable solution in 5 minutes of trouble. Useless argb controller included. According to the idea, you can connect at least all the screws from the case there, but it was easier for me to use the ports on the mat. board. The pump is connected to the cpu fan. No pump fan needed. At maximum speed, and it works like that by default, it hums. You need to go into the BIOS and select auto adjustment there and it is by voltage, because pwm on my msi b550 tomahawk max wifi bugs everything and automatically sets it to max speed. If the adjustment is by dc, then 1600 rpm at least turns out to be both quiet and cold. At idle 40 in games 60. : The pump starts to crackle and disappears from Hades if the percentage becomes very cold. We are not interested in this mode of operation, so now I apply the voltage at least 4v and the work becomes more stable
Cons
  • It is necessary to tighten the screws on the radiator with special effort. Fastened to the top of the case for blowing. My cheap screwdriver set can only be used with gloves or it will hurt. Dropsy itself at max speed is quite noisy, which is understandable. Not for quiet builds.