Review on MikroTik Dual-Concurrent Access Point: hAP ac Lite RB952Ui-5ac2nD-US by Taufik (Taufik) ᠌

incredibly complicated . device, why a router for 2 thousand so many settings is not clear to me. Maybe as an access point it works fine, but I needed to replace the Chinese curve, which cut the speed wildly in the form of a bunch of two routers. United by a bridge. I opened the instructions, only the reset procedure is described in detail (then after the 123rd reset, I understood why). After the instructions, I began to install, thinking, well, since there is nothing in the instructions, then everything should be intuitive, but no ! I'm not going to study all these strange abbreviations, IT terminology, etc., and as it turned out, not every IT specialist is accessible (having caught the admin at work, I asked him if he knew what it was, he looked at me with eyes of five kopecks, and leaked ) in short, IF YOU NEED SOMETHING LITTLE HARDER than an ACCESS POINT, DO NOT BUY IT! The amount of knowledge that you need to get to set this up is not up to the task! in June, I hardly restrained myself so as not to break them against the wall, wound the wires and put everything in boxes, now the second attempt, December . Ok, the last review did not go through because of the many words in it that could offend users of the amazon . August, it seems that the bridge works, but if you connect to the WiFi network that the bridge forms, the Internet works with strange interruptions, so a Chinese router (sic!) hangs on the leading box via LAN, the port for which had to be configured, (port for LAN to configure !.)