Well for example it would be nice to know which pin the red wire is attached to. This did not match the SAE fused cable I purchased that connected to my battery. The red wire coming from the battery is correct and has a closed contact so as not to accidentally short something. But this bulkhead is not designed for that. It is connected to the open red pin. To get what I was doing to work I had to install 2 additional cables with connectors on one end and bare wires on the other. Solder these two cables together. Not quite as I wanted as this is where I was looking for a more watertight fairing joint. I wanted a pigtail about 10-12 inches long coming out of the battery compartment. Now I have twice as much. A simple printout or a better picture showing which output is the problem would solve the problem. Anyone who wants to do something similar. Socket contact on this bulkhead connector. Depending on what you use it for, so which way you go. This connection may or may not be correct. If you're powering this connector, it's probably not correct, depending on the cable you're using. (As in my case). If the power comes from the back of the plug, it can work with whatever you plug in. Again, this may depend on the cable you are using to connect. Keep this in mind when attempting to match other cables you order.
Charger Vympel 57 black
110 Review
Case Compatible With Halo Bolt Portable Car Battery Jump Starter 58830/44400/57720 MWh Charger. Power Bank Holder For Halo Power Station 100/For AC Outlet.(Not Fits For Halo Bolt Air, Box Only)
24 Review
Mroinge Automatic 6V/12V Trickle Charger For Vehicles, Motorcycles, Boats And More - Maintain Your Batteries With Ease!
29 Review
Xiaomi 70mai Jump Starter Midrive PS01
120 Review