Requires a lot of adjustment to get the right audio level. Tools used: 12mm wrench 10mm wrench 7mm wrench #2 Phillips [STEP 1] Loosen the 7mm nut on the rear Phillips head screw. will sound when the device is turned on, and then slowly loosen the Phillips screw. If the beep sounds when the device turns on, slowly tighten the screw. The loudest setting is reached when the screw is tightened almost noiselessly. Loosen the 10mm hex nut on the front panel with a sound until the panel starts to wobble. Tighten slowly until the horn sounds like a road runner (meep-meep). Use plenty of threadlock to keep the 10mm nut in place. [STEP #3] The mounting bracket is actually two metal plates stacked on top of each other. Loosen the 12mm hex nut on the back of the horn, then position the holes of the two plates according to the size of your car. Tighten the 12mm hex nut and install the horn. After installation, you may need to repeat step 1.
Car compressor Aggressor AGR-75 orange
14 Review
π Zento Deals 12V Single Trumpet Air Horn + Compressor β Powerful Loud 150db for Truck, Boat, SUV, Train
9 Review
XtremeVision AC 55W HID Xenon Premium Slim Ballast - Get A Pair Of 2 PCS Now!
18 Review
π’ Powerful FIAMM 7201622 OEM Dual Horn Assembly for GM/Chrysler/Ford - Superior Sound and Performance
9 Review
4WD ORCISH Recovery Traction Boards Tracks Tire Ladder For Sand Snow Mud - Set Of 2 (2Nd Gen Bag + Mounting Pins, Black)
39 Review
Yokohama Ice Guard IG50 215/50 R17 99Q winter
36 Review
ORCISH 12V 13000-lb Load Capacity Electric Truck Winch Kit π with Synthetic Rope - Waterproof Off Road Winch for Jeep, Truck, SUV
35 Review
Cordiant Road Runner 195/65 R15 91H summer
24 Review