BOUGHT THIS FOR MY 2018 KIA SPORTAGE, I took out the rear lower seat and put the cover on at my house because of a windy and cold day. easy to install. Then set the seat on the platform without engaging the seat latches so I can reach the straps around the seat back. Easy installation, zipper was 3/4 inch from seat position. No problem. locked the lower seat. and checked the position of the headrests to make sure no seams or zippers got in the way. Then cut a slit, about 3/4 inch lengthwise, and then make another cut across to get the shape you want. then pulled the fabric around the headrest insert, the fabric shrunk well, no cuts can be seen. The zippers on the lower seat are perfect for seat belts. mine are on the bottom seat. Overall a very good design. I am very satisfied with the result. Note that you must pull the material towards the bottom seat by the side latches, otherwise the material will catch on the latches. Also, in the front latches on the underside of the seat, you'll need to pull the material back a bit for it to snap properly. I only had arm surgery a month ago and was still able to install it in about 30 minutes total time. I might suggest additional straps if the seats fold down. just for stability.
ποΈ Enhance Your Polaris Sportsman ATV with Extreme Max 5600.3160 Winch Mount!
5 Review
π Champion Power Equipment-12003 ATV/UTV Winch Kit, 2000-lb: Unleash Your Vehicle's Full Potential with this Versatile and Reliable Winch Kit
3 Review
π΅ Xislet 7-Pin Winch Rocker Switch Replacement Review for Polaris UTV ATV RZR 800 900 XP 1000 Turbo Ranger General 1000 Momentary Winch in/Out with Jumper Wires and Instruction (12/24V DPDT Blue)
7 Review
ποΈ WARN 101025 VRX 25 Powersports Winch | Handlebar Mounted Switch | Steel Cable Wire Rope: 3/16" x 50' | 1.25 Ton (2,500 lb) Capacity
3 Review