Review on 7345 953 Bearing Cartridge Anemometers Manufactured by Ryan Bennett

I have a Vantage Pro 2 from 2014. This module is suitable for any Vantage Pro 2 Spring 2013 or later. The steps to replace were easy. Use a hex wrench to remove the wind cups. (I hope you kept yours from the original install). Then remove the Phillips screw from the existing module. Removing an existing installed module may require little effort as it has been there for years. Just work with it carefully and this module will eventually be released. You will most likely see a magnet on the top of this old module and not see it on the new replacement module. What you will see is a plastic cover. I figured I would have to remove this cover as there were no instructions, but I decided to just install the replacement module as is with the cover and then see what happens. I secured the new module with a Phillips head screw and then reattached the wind caps with an allen wrench and then tested the display and it actually worked fine. 5 minutes effort and an inexpensive solution to such a problem, which didn't exist for windshields until 2013. Thanks to Davis for this excellent and inexpensive implementation. Thank you Revain for the one day delivery.