Review on 🖥️ Mount-It! Dual Monitor Mount - Double Monitor Desk Stand with Heavy Duty Full Motion Adjustable Arms - Fits 2 Computer Screens 17-27 Inch - VESA 75/100 - C-Clamp and Grommet Base by Chris Graves

Overall excellent stand Everything is solid and the monitors don't move after installation, just make sure all the screws on the brackets are tight. 1 star deduction because the monitor mount could be a little better. You can make the monitor mount a little tighter, I used Gorilla tape on the side of the arm to add more thickness. The bolt that secures the monitor/elevator adjustment is terrible, after installation there is a small gap from the bracket to the fixed washer on the bolt. After you adjust the bolt so that the bracket is a flush fit, the acorn nut goes all the way down before fully tightening the bracket, causing too much play. Washers will fix this or use a different nut. The last issue I had was that the screws that came with it were too long to attach the bracket to the monitor. I used light switch standoffs with tabs cut off to add some clearance for tightening the screws. All in all, the problem was the actual mount that goes to the monitor, which could have been tweaked a bit, but luckily I had a few things to fix the problem.