When installing the fan on the motherboard, the shortcomings of the kit were revealed. The holes in the plastic "clamps" are smaller than the "nuts", as a result, for installation according to the instructions, they must be modified. After dismantling the native "socket", attaching the assembled bar from the kit to the reverse side, I noticed that the middle part under the processor rests against the motherboard, and the extreme points (to which the cooler is attached) are in the air, and the entire structure during installation will rest on the processor socket . I decided to leave the "native" bar on the back side of the motherboard (it is pressed closely on an area of 6x11cm), and on the processor side I dismantled the plastic holder and installed the cooler using the brackets from the kit.
🔋 Power Up Your Gaming Rig with AMD Ryzen 5 2600 Processor with Wraith Stealth Cooler - YD2600BBAFBOX
116 Review
Deepcool GAMMAXX 300 CPU cooler, silver/black/blue
166 Review
💪 AMD FD6300WMHKBOX FX-6300 Black Edition: 6-Core Processor with Unparalleled Performance
134 Review
🌬️ Silent Cooling Power: Dark Rock Pro 4 CPU Cooler with 250W TDP, BK022
134 Review
M.2 Screw Kit: Easy Mounting for NVMe SSDs on ASUS Motherboards
19 Review
36-Pack Black Rubber PC CPU/Case Fan Screws/Rivets Set for Computer
11 Review
Glarks 660 Pieces Phillips Assortment Motherboard
10 Review
MacBook Retina 13-inch (A1425, A1502) and 🔩 15-inch (A1398) Bottom Case Screw Set with Pentalobe Screwdriver
11 Review