I bought these to replace my existing reverse osmosis pump. Positive are: very easy installation, good customer service, the pump includes a throttle, an automatic shut-off and a check valve. The only downside is that customer service says they "can't regulate the on and off pressure, so it turns on with only a 10psi pressure drop." cause TDS creep. In other words, your TDS increases every time it is turned on. I overcame this by putting a T in the input line of the POST filter and setting a 1/4" cutoff just before the POST filter and another cutoff at the fork of the T so I could turn the pump on manually - and off could Deliver and dump the first quart or so of water produced into a small bucket and pour it down the drain. (Every pump has this problem, but my last pump wouldn't turn on until after a 20psi pressure drop). I've since installed a 20 gallon tank so I don't have to monitor my system as closely.
NANPU 1/2" NPT Air Drying System - 5 Micron Particulate Filter, 0.01 Micron Coalescing Filter, Air Pressure Regulator Combo - Semi-Auto Drain, Poly Bowl W/Metal Gauge
23 Review
NANPU Air Drying System With Double Filters And Pressure Regulator Combo For Clean And Controlled Air Supply
18 Review
NANPU DFR-02 1/4" NPT Air Drying System - Double Air Filters, Air Pressure Regulator Combo - Semi-Auto Drain, Poly Bowl
20 Review
NANPU 1 FRL Air Filter Regulator Lubricator Combo With 0-150 Psi Gauge, 5 Micron Brass Element, Poly Bowl & Semi-Auto Drain - Metal Bracket Included
20 Review