1 Level
1294 Review
72 Karma
Review on JERRAY Flutes Carbide Diameter Cutting by Brian Kingsford
Large Hardwood Cutter
This cutter did a great job of cutting a very thick hard sheet of maple. It was run at 25 ipm feed at about 16000 rpm on the Shapeoko 3. The depth of cut was 0.050 because the top of the slab was very uneven. Sometimes it dropped 0.1 inches at 12.5 inches per minute. Never burned and left a very smooth cut.
Pros
- Cutting Tools
Cons
- Crumpled
