Review on Steam cleaner KARCHER SC 1 EasyFix, yellow/black by Franciszka Lewko ᠌

At the beginning of work, it strongly spits boiling water until the work is debugged. 200 ml reservoir. due to the fact that at first the device releases a lot of hot water, the actual working water becomes even less. If you need to clean a large area (and this is just one wall of a standard bathroom - the seams between the tiles) you will have to top up (the process is a little hemorrhoids - you need to disconnect from the network, then release all the pressure, then pour out the remaining water, then pour it on a new one, wait until it heats up) . And you will have to top up often, very often. Very wet surface. If you are cleaning the wall, put a large rag on it, otherwise a huge puddle will instantly appear on the floor. In general, stock up a lot of rags, you constantly need to wipe both water and dirt. It won’t clean out old fat, here it drives noise and there is no replacement for it. The hood in the kitchen will not be cleaned. The floor nozzle is meaningless and merciless, there is a lot of water at once and an instantly wet rag on the nozzle (it’s easier to wash with water) Don’t even buy a clothes nozzle, there will be no point in it (if there is a need, you need to buy a steamer). Washing windows - and again a sea of ​​\u200b\u200bwater on the windowsill and immediately a completely wet rag put on the nozzle. But, smartly launders all the cracks in the frames (carefully, the dirt flies in all directions). The result is overrated, the functionality is less than stated. Great for any gaps and crevices, you can still disinfect something (only the nozzle should be close, then the steam is hot). Models will also be more expensive in reality with cropped functionality (the floor nozzle for all models is stupid), the difference is only in the volume of the tank and the method of heating water, and therefore in the operating time of the device. Tip - if you want to buy this or another model, read the instructions for the device - topping up method, waiting time, etc.