Review on 🚀 Enhance Lift: Rubicon Express RE1325 1.75" Front Coil Spacer for Jeep JK by Richard Gallagher

I received them very quickly and installed them almost as quickly. If you have a jack and 2 large jacks these things are a walk in the park. Raise one side of your Jeep with a jack and place a stand under the frame near the front, then do the same on the other side. Your axis is now free. Place a jack under the axle and slightly raise one side. Remove the lower shock absorber bolt, lower anti-roll bar bracket bolt and brake line joint bolt. Use a jack to adjust the axle height to remove the shock bolt. Do the same on the other side. Now pull out the springs and mount the spacers, put the springs back in place. When installing the second spring, use a jack on the other spring already in it to compress it a bit. We put all the screws in place and you're done. Also spray some WD40 on the spacers to help them pull in. With a steel bumper, winch and bottom armor, I really needed them.