The car cover arrived neatly folded and tied with a ribbon. Then placed in a shrink plastic bag. Also included was a small car cover. So far, so good. I hoped it would be as advertised and fit the car like a glove. The reviews seemed promising. So I took my time to see if it would fit the car. Also, I had to order the cable and lock separately and it was back ordered and was only supposed to arrive a week later. I stupidly miss the return window. Too busy to wash the car and try on the cover on a clean car and found a number of excuses to procrastinate. Obviously my fault up to this point. And here I am disappointed. I immediately noticed that the case didn't fit. Too small for the Accord CoupΓ© EX-L. In addition, the cover on the driver's side moves the side mirror forward. In this case, the right exterior mirror is not energized. I thought the cover had shifted to the right, but pulling to the left to release tension from the front left side mirror didn't fix the problem. As a result, I came to the conclusion that the coverage is asymmetrical. On the plus side, the back of the car lid appears symmetrical behind the side mirrors. However, she is super tight. Darts and seams do not match the Accord CoupΓ© body lines. A fabric strap with a plastic fastener is supplied to secure the cover under the car. However, every attempt to secure the suitcase with a cable and a lock failed. terrible because the holes in the plastic sleeve are too small for the end of the cable tongue to pass through. Tried two different cable locks, none worked. Tried to push through the cable eyelet but this resulted in the sleeve splitting in half exposing the webbing. Also, the lid's inner lining is quite thin, rough, and will likely scratch the paintwork. Pros: 1. arrived nicely folded and tied nicely with ribbon 2. comes with a small pouch for the car cover 3. fits symmetrically on the back of the side mirrors 4. includes a fabric strap to attach the car cover with a plastic clasp 5 Appears waterproof Cons: 1. disappointing attempt at custom fit 2. asymmetrical - in front of side mirrors 3. plastic grommet holes too small to put cable lug through 4. grommet split in half 5. inner lining thin, rough and may scratch paint 6 , seams to follow not the lines of the body