Review on 📻 Omix-Ada 17214.02 Black Radio Antenna for Enhanced SEO by Ken Booker

Needs to change installation to make it work. Put on CJ7. The paint is peeling off, so be careful. I had to drill 3 new screw holes but I reused the middle hole to allow the wire to go through. All 3 screws were removed so I used my own stainless steel screws to mount it. In addition, the end of the antenna cable that was plugged into the radio broke. The pin got cut off somehow, but the wire stayed inside. I had an old antenna extension so I used this one. Need it if you mount on the driver's side, otherwise it will be tight. I left the top mount on the jeep and slipped the antenna through. Overall it looks good and seems to have a few stations/cleaners in my shop.