Review on Lumabase Electric Luminaria Kit Tan, Pack of 10, C7 5W Bulbs on 360-Degree Cord, Model 32310 by Carrie Spencer

This time I ordered two sets in addition to what I received last year. This is my second year using them as outdoor Christmas decorations. I preferred the electric luminaria kit over traditional paper bags, sand, and candles because of its durability, low maintenance during use (especially if you're using a timer with an electric light sensor), and increased safety (no open flames). They have a great look and imitate traditional lamps. In the box: 10 plastic bags, 10 plastic LumaBases, 10 hard plastic 4.5 inch pins with nails, 1 power cord with 10 7W 120 volt bulbs installed, as well as large and small instruction sheets. flexible plastic "bags"; They are supplied flat for easy assembly along the fold lines (make opening and forming a closed bottom easier). They can easily be flattened again for storage. In addition, the pockets have a recess for a light bulb on the back, above the inserted LumaBase. The hole is only big enough for the lamp base, so the inner lamp is screwed into the outer socket. There is also a stake hole in the ground. LumaBases fit in your pocket and can be filled with water; However, I decided to fill them with sand. The base has indentations in the center for 3 different size candles (e.g. tealights or votives; I don't know what the melting point of the base is, so be careful when using candles; You can use battery powered electric tea). lamps and votive candles). Of course, since I bought the electric version of the kit, I don't use candles. Outlets for electrical cords are spaced approximately 3 feet apart. There is a male connector on one end and a female connector on the other, allowing multiple sets to be spliced back-to-back. The first outlet is about 2 feet from the plug. To keep the Luminaria in place, you have the flexibility to mount them with pegs or LumaBases, or both. Outlets for electrical cords are spaced approximately 3 feet apart. There is a male connector on one end and a female connector on the other, allowing multiple sets to be spliced back-to-back. The first outlet is about 2 feet from the plug. To keep the Luminaria in place, you have the flexibility to mount them with pegs or LumaBases, or both. Outlets for electrical cords are spaced approximately 3 feet apart. There is a male connector on one end and a female connector on the other, allowing multiple sets to be spliced back-to-back. The first outlet is about 2 feet from the plug. To keep the Luminaria in place, you have the flexibility to mount them with pegs or LumaBases, or both.