Review on 🎨 Enhance Your Creativity with 39 PCS Resin Molds and Hair Clips Jewelry Making Set - Perfect for DIY Barrettes, Pendants, and Keychains by Dawn Fischer

In 3 days I managed to make the whole set of hairpins. The mold cavities are flat and very close together and there is only a very short piece of "wall" separating the cavities so you have to fill them slowly and carefully or the resin will drip/run into the one next to it. The molds aren't deep enough to place the clips in the liquid resin, so while mixing the next batch of resin I took a brush and applied the clear resin to the back of the gold clips and then placed them over the finished clip molding. To form. The molds themselves aren't bad, but are very small and not very strong. The included clips are gold colored, very pretty and have strong springs, but they don't match the bobby pins at all and are visible through the center of the bobby pins' shaped tips. I had to use my own silver clips on the straight clips as the gold clips provided were too long and needed to be visible on both ends of the clips. It's a great concept but requires some work as the molds aren't all as strong and user friendly and the included clips need to fit the mold parts better.