On the aerodynamic arches of the Hyundai Grand Starex, I put Atlant myself without any assistance from outside sources. The following is a list of advantages that boxing has. 1. Two aluminum profiles recessed into the longitudinal stiffeners along practically the whole length of the bottom from the outside. These profiles are pierced by the fastening screws, and the stop for the clamping bars inside the box while they are being tightened falls not on the pure plastic of the bottom (as it does with the majority of manufacturers), but rather on the plastic under which the profiles pass. 2. The position of the clamping bars can be adjusted for the distance between the arcs not by drilling holes in the bottom of the box, but rather by allowing free movement in long cuts that have been sealed with rubber seals. This is very important when using the box on different cars that have different distances between the arcs (if there are multiple cars in the family, it will be sufficient for him to ride with you). 3. The front part of the box is strengthened on the inside with a metal crossbar that is placed between the longitudinal profiles of the bottom. This ensures that the load will be distributed evenly over the front part of the box and that the nose of the box will not collapse under the weight of the load. 4. The lock clicks into position extremely gently; all that is required is a small touch in the appropriate areas on the loops. Only once the striker plate has made contact with all four loops can the key be removed from its slot. 5. Length and volume - I packed three sets of skis in cases that were 180 and 170 centimeters long. This took up half the breadth of the box, but you can still easily stack a lot of things on top of it. If you put it in the centre of the box, there is still a margin of 5-7 cm on either side of it. The Thecomver 180 lay down on the edge of the box along the length quite closely. Due to the height of the vehicle, I was need to purchase a ladder with three levels in order to reach the farthest reaches of the inside. I additionally placed an order for LUX fasteners on brackets (art. 791194) to provide a secure hold while using standard mounts. The opening can be seen from both sides, and it "plays" as one would expect it to. Plastic, however, just like other more well-known brands, and hinges and car lifts. It's too soon to determine the reliability, but everything looks like it was done well. Boxingcomlor is a matte black color that is not smooth but has a textured appearance and looks nice. Video link
GSPSCN Cargo Net 4' x 6' for Truck Pickup Bed, Trailer, Boat, RV SUV – Heavy Duty Bungee Cord Net Stretches to 11'x17' – Compatible with Dodge Ram, Chevy Ford, Toyota
27 Review
Premium Soft Vinyl Tonneau Cover For Dodge Ram 1500/2500/3500 - Fits 6.4/6.5 FT Feed Bed - Easy Roll-Up Design - Compatible With 2002-2018 Models - No RamBox On Top - Fleetside Only
38 Review
Maximize Your Ford F-150 Truck Bed'S Security With BAKFlip MX4 Hard Folding Tonneau Cover - Fits 6' 7" Bed
35 Review
Upgrade Your Ford F-150 With A Quad Fold Soft Truck Bed Tonneau Cover - Perfect Fit For 2015-2023 Models!
37 Review
Yokohama Ice Guard IG50 215/50 R17 99Q winter
36 Review
SuperJump Trampoline with SuperJump 8ft (244 cm) net and ladder
29 Review
Cordiant Road Runner 195/65 R15 91H summer
24 Review
4WD ORCISH Recovery Traction Boards Tracks Tire Ladder For Sand Snow Mud - Set Of 2 (2Nd Gen Bag + Mounting Pins, Black)
39 Review