Review on Computer case Deepcool Matrexx 55 black by Stanislaw Siwak ᠌

The Schyte Mugen 5 rev. B cooler got up normally, about 1 cm left to the glass. But if you have a healthy 165 + mm fool like Deepcool Lucifer V2, then check it for height in advance. Also, if you plan to put coolers on the front panel, then think about a pwm splitter cable or extension cords, because. they are quite far from the motherboard. Different pros: BLOW For such money, I did not find a case with such space. Well threaded bolt holes throughout the body. Large space for cables. Lack of complete coolers. (Yes, this is a plus, it is better to buy good and quiet coolers separately) Some cons: The hard drive sled is VERY tight, you have to force it to get it out. There are not enough supplied screws to install 4x120mm and 2x140mm coolers, be careful and buy 10+ spare cooler screws. The holes for the cooler screws are only 0.5mm narrower than the screw heads, so if the screw isn't exactly centered, it can go right through. The holes in the dust covers are quite large, fine dust will not be stopped.