Review on 🚗 Cllena 5-in-1 Car Charger Panel with Dual USB Sockets, LED Voltmeter, Cigarette Lighter Adapter, Toggle Switch – Blue by Octavius Webster

Fits the 12v sockets in my van. I wanted another Duell 3.0 USB plug and they all came with gauges so I used the one they ended up going with from the same company to replace the gauge plug. I was hoping it would fit and it was close. The panel and included connectors are slightly flat on both sides to keep the connector straight in the panel. Being aluminum, it was easy enough to sand down with a small rotary file in my drill press (as was the separate 3.0 connector). Also, the switch backlight and meter are very bright in a dark camper, so I connected the switch to turn off the lights on the switch, not just turn off the panel. I've already done this with another USB socket and a similar switch thanks to a helpful guide from someone. The basic schematic that comes with the panel is pretty good. Clamps included, cables not included. A 16 gauge fits fine, the 14 gauge I used was a bit heavy to get the two ends into the terminal. The wire came up fine, but the insulation had to be cut to the edge of the shovel. I have a couple of small USB lights that work well in these ports and also use them for phone/watch/camera chargers and my drone charges fine with a 12v plug.