Review on 📽️ VIVO MOUNT-VP02B: Universal Extending Ceiling Projector Mount - Height Adjustable Projection in Black by Matthew Baltimore

This product is a well designed hanger. The slide in the extension is great. One nut was missing, MM. Was able to replace the same size with a bolt and nut combo. The instructions are clear and well structured. There are no written instructions. This is usually a plus. I will hang the projector on a false ceiling. The panels are not strong enough and may break if pulled too hard. I will replace it with 1/2" plywood. The mounting plate is smaller than half the normal size. Due to the smaller size, I will fully assemble the gimbal and projector and then put them back in place. You may need help with this one. So far it's looking good. I'll try to add more info later. Later: While the product advert says the wiring can be hidden behind the speaker, obviously you can run a wire through it and you should be able to use an SVGA -Plug. I have doubts about the DVI connector. If the DVI connector is a bit bigger you will have problems. The SVGA connector is stuck. As mentioned above, I had to replace a set of screws that my SVGA connector Doesn't get through. I have to use black zip ties and route it over the back of the hanger. Happy with it anyway.