Review on 🛢️ EZ-POUR B00YP3YTXM Gas Can Replacement Spout – Hi-Flo System with Extension, Gas Can Nozzle, Flexible Gas Can Spout for 1, 2, 5 Gallon Jerry Can by David Stewart

For those wondering if this will work, especially for Briggs and Stratton smart fill canisters I can say they will work, but you must reuse the original screw connection on the nozzle that came with the canister. The seal on the new nozzle is slightly smaller than the hole diameter on these cans, but it still overlaps and doesn't leak when I invert the can and squeeze it when it's upside down. Let's see if it holds up well over time. (((UPDATE: I found out that EZ-POUR have identified an issue with their screw connectors not working for this type of glass and are actually offering a free replacement connector [color gray] that fits to better/tighter tolerances than reusing one from the original tin.If you search the web for a request to replace the EZ-POUR base cap, you will find a page to request how many you need.I submitted my information a few days ago and received no reply, but only showed up at the post office today and fit perfectly.))) installation instructions ventilation; On a flat surface, sand down the rough texture of the can, not directly over the seam where the two halves of the can meet in the middle (risk of cracking if drilling directly into the seam), then drill a 1/2 - inch hole. (As the instructions say, don't use a regular wood/metal drill bit.) I used a step drill to drill the hole and even did it with the gas that was still in the can, but I used a shop vacuum , to pick up any plastic parts and do not let them fall into the jar.