I used PVC [CONICAL] pipe thread fittings. Use [ONLY] yellow gas tube [thicker] Teflon tape. Do not use pipe lubricant in addition to the tape. will run worse. I made that mistake on my new 60 gallon air compressor tank [ahh!]. 15 fittings. Wrap 3 times with tape. no leaks; Period. The PVC will shrink as it is screwed into the brass. there will be no metal on metal! Make sure the fitting does not hit the body before it is fully tightened. Trim off the excess at the end if so. That's where all the leaks come from, or you may have used straight threads instead of tapered pipe thread fittings. People throw the wrong fixtures in the wrong bins, etc. It's all about the details. month 2; no leaks!
NANPU 1 FRL Air Filter Regulator Lubricator Combo With 0-150 Psi Gauge, 5 Micron Brass Element, Poly Bowl & Semi-Auto Drain - Metal Bracket Included
20 Review
NANPU 3/8" NPT Compressed Air Filter Regulator Combo Piggyback, 5 Micron Brass Element, Poly Bowl, Semi-Auto Drain, Metal Bracket, 0-150 Psi Gauge
26 Review
Filter under the sink Aquaphor Favorit ECO silver
20 Review
NANPU 1/2" NPT Air Drying System - 5 Micron Particulate Filter, 0.01 Micron Coalescing Filter, Air Pressure Regulator Combo - Semi-Auto Drain, Poly Bowl W/Metal Gauge
23 Review