Review on 💻 PcProfessional Screen Protector for Acer Aspire R 15 2 in 1 15.6" R5-571 Laptop - High Clarity Anti Scratch Shield (Set of 2) by Mike Wallace

A high-quality assembly is not possible. Came in a set of two. My wife initially tried several times unsuccessfully to apply and remove bubbles until the first screen protector was junk. I then tried unsuccessfully to apply a second protective film and remove the bubbles. Last summer I treated almost every window in my house with UV protection, it follows the same process and I've had no trouble getting the bubbles off on it. This product is not suitable. The glue is too sticky, without spray on the screen and on the protective film (this method is used on windows) it was impossible to move the cover when it touches the screen. The corners of the screen protector don't match the shape of the screen, so it's very difficult to line them up. Also, there is no room for error, there should be 1/16 inch on each side not covering the tread. Nobody can install perfectly. Because this is a computer screen, you cannot cut through the protective film with a razor blade like you would a window. Very disappointed. Even my phone screen protector has 1/16 on each exposed edge and is much easier to fit on the smaller screen. There is also a film on both sides of the tread that needs to be removed. First remove the side of the laptop and stick on the screen protector, after positioning it perfectly and removing any bubbles, remove the film from the outer surface, if you do this it will rip off the screen protector and ruin all the work you are doing . I just smoothed it out and removed the bubbles. I hope this review helps someone decide to look elsewhere for a screen protector.