Review on Enhance Your Vehicle's Style with XPLORE OFFROAD - Black Die Cut American Flag Window Decal for Trucks, SUVs, Cars by Joshua Reid

The decal would certainly be easier with two people, but I could have done it alone. I washed the rear window thoroughly with Windex and then sprayed and moistened it. I slowly peeled off the backing, revealing the adhesive side of the sticker. Be careful during this part and move slowly to avoid breaking the edges, especially around the stars. I used Windex and sprayed onto the adhesive side of the decal, keeping it fairly wet during the process. I sprayed the rear window again and lifted the decal myself. Windex allows plenty of time to move around and position the decal. After that I used the included scraper to remove the air and Windex. A NOTICE. When using the mop, move from left to right! If your window is really wet and you start wiping up and down, your streaks may appear! For trucks with a recessed sliding rear window, be sure to wipe outward from the edge of the sliding window and DO NOT cut the center of the sliding window until the main part of the window is clean. This will help the decal stick better and be easier to cut with a razor blade. I also left the decal on for a while to dry completely before trimming the edges of the entire decal. This will prevent the sticker from rolling/sticking and leaving an ugly cut. It also makes it easier to peel off the backing after the sticker has set for a while. Take your time and go slowly during this process. This is the key to not breaking any of the star's straight lines and edges. I love the look and how it turned out! Take your time, this is a high quality decal and with patience it will turn out great!