(further I describe the procedure, only for those whose device does not work adequately out of the box (it turns off, there is not enough 5G, the speed is low, for some reason the drivers included and from the TP-Link website do not allow the device to work fully in the 5G range, with 2.4Gz no problems were noticed even from the box.)) In order to start using the device fully, you need to do the following: 1. Install Realtek USB WLAN Family Controller RTL8812BU drivers (because the device runs on Chip model: RTL8812BU) 2. Configure the router in the 5G settings through the admin panel (19220228.0.1) to channel 36, this allows you to increase the 5G speed. 3. Disable automatic driver ates in Windows. It was only thanks to these manipulations that I achieved such speed with 5G, I hope this will reduce nerves and time for setting up someone.
🔌 TP-Link AV1000 Powerline Starter Kit (TL-PA7017 KIT) - Gigabit Port, Plug&Play, Nano Size: Ideal for Smart TV, Online Gaming - Renewed+
10 Review
📶 ASUS PCE-AC68: Dual-Band AC1900 PCIe WiFi Adapter with Heat Sink and Magnetic Antenna Base for Enhanced Coverage
7 Review
🔌 Highly-Compatible Plugable USB 2.0 to Ethernet Fast 10/100 LAN Network Adapter for Chromebook, Windows, Linux
7 Review
LOTEKOO 300Mbps USB WiFi Adapter - Plug-and-Play Wireless LAN Network Card Dongle for Windows 10 8 7 XP MAC OS - Ideal for Desktop Laptop PC
9 Review
🔌 CERRXIAN RS232 to Ethernet Serial Device Server - TCP/IP Converter with 1Port DB9 RS232 Serial to Ethernet Connectivity
3 Review
🔌 USR-TCP232-410s: RS232/RS485 Serial to Ethernet Adapter/IP Device Server with DHCP/DNS Support
4 Review
🔌 StarTech.com NETRS232 Serial to IP Ethernet Device Server - DIN Rail Mountable - Serial Device Server - Serial Over IP Device Server (Black)
4 Review
🌐 StarTech.com NETRS2321P: 1-Port RS232 to Ethernet IP Converter, Serial over IP Device Server - Black
5 Review