Review on 🎧 Countryman H6 Omnidirectional Wireless Headset Microphone for Shure Carvin JTS Trantec Transmitters - Tan by Vincent Bain

The Countryman H6 is the clear answer for those who have problems with the customization of E6 models. Properly assembled, the E6 was certainly a winner, but gaining the time required to securely assemble the E6 to a speaker has been a challenge for many audio engineers, myself included. I work as an audio engineer at a university and also at a church, and we have guest speakers several times a week. We often don't have time for a proper sound check and that always leads to problems off the board. Feedback and inconsistent levels galore. The H6 is largely spared from these problems. First, it's a lot easier to set up on the fly and it will take a lot less time. It also stabilizes the microphone by pressing firmly against the face of the speaker. Gone are the inappropriate days of having to put your hands on a preacher's or pastor's face while you lean forward and adjust the mic to their cheek. For the most part, the H6 is so simple that most speakers don't need much help. In terms of sound quality, it's everything you'd expect from a Countryman. Very uncluttered and as it is installed correctly it doesn't require a lot of additional setup due to the board. I've found that if you have a regular speaker, after choosing their voice, you can save your settings and be sure it will sound the same next week. I would highly recommend the H6 to any church or venue that regularly hosts microphones.