Header banner
Revain logoHome Page
Adi Agung ᠌ photo
1 Level
116 Review
66 Karma

Review on Unleash High-Performance with AMD Ryzen 5 3600XT Processor & Wraith Spire Cooler by Adi Agung ᠌

Revainrating 4 out of 5

A good product at a good price, I advise you to try it.

Windows 10 x64 20H1 DREY, ASROCK B450M PRO4, SSD 256, inno3d gtx 1080 8g overclock 1900-12022 @ 0.950v Razen 3600 overclock 4.0 GHz @ 1.2v, Ballistix DDR4 3000 overclock 3600 (16-19-16-16) 16 GB 1.35v, ice hammer hi 4800 cooler in 2k games I don’t consider FHD at all, because this resolution is only for YouTube, many are already switching to 2k and 4k, especially with the Razen 3600 After installation on the mat. board, there were problems, before that it was 1600, ated the BIOS to 3.90m, troubles went, handed over the board for repair, there were problems with power supply, cheap boards are not compatible with it, but everything seemed to work, the troubles did not disappear until I lowered the e. G. reset overclocking to 4000 at 1.2 v, and also enable bios global c-state control, boost is disabled accordingly! In games, the pace began to strain. because most of the processes are always loaded more than 60-70 percent, due to these problems I decided to switch to the Razen 2700 and was pleasantly surprised, everything just started to fly no worse than the Razen 3600, and most importantly, with the same overclocking to 4000 at 1.32v temperature decreased to 8 degrees in everything, in idle time by 15 grams, but began to eat up to 110w against 80 w at 3600, but there are more cores - there are more threads. I do not recommend overclocking the Razen 3600 to 4.2, because the temp. takes off at times, albeit at 1.25 v and already with temperature instability, for 1.3v it’s generally up to heaven on my hi 4800 The increase in games is a minimum of 3-5 FPS compared to the Razen 2700, let me remind you that I have 2k + 1080 I think that and from 1080 TI the increase will be small in FHD it will be more noticeable! From bitter experience, I realized that for budget iron in 2k - the best solution is 2700, because in the future 3600 will be clogged to the eyeballs with processes, the temperature is sky high and buy CBO Choose and adjust wisely, otherwise the hype was raised without explaining that in high resolution 2k and with a not very powerful video card - it is unnecessarily

Pros
  • Performance, overclocking, FHD really increases FPS and that's it
Cons
  • Heating, compatible with cheap mat. boards (power) and even with the latest BIOS. Explanations below and only for my hardware in 2k