Review on FH Group FB051GRAY013 Gray Universal Split Bench Seat Cover (Allow Right And Left 40/60 Split by Ken Desens

PURCHASED FOR MY KIA SPORTAGE 2018, I took out the rear lower seat and put the cover on indoors because of a windy and cold day. easy to install. Then set the seat on the platform without engaging the seat latches so I can reach the straps around the seat back. Easy installation, zipper was 3/4 inch from seat position. No problem. locked the lower seat. and checked the position of the headrests to make sure no seams or zippers got in the way. Then cut a slit, about 3/4 inch lengthwise, and then make another cut across to get the shape you want. then pulled the fabric around the headrest insert, the fabric shrunk well, no cuts can be seen. The zippers on the lower seat are perfect for seat belts. mine are on the bottom seat. Overall a very good design. I am very satisfied with the result. Note that you must pull the material towards the bottom seat by the side latches, otherwise the material will catch on the latches. Also, in the front latches on the underside of the seat, you'll need to pull the material back a bit for it to snap properly. I only had arm surgery a month ago and was still able to install it in about 30 minutes total time. I might suggest additional straps if the seats fold down. just for stability.