If you have water cooling and good heat dissipation, then you have nothing to worry about. I use Thermalright ARO-M14O with the tower, so heat is important to me: due to the large internal potential for overclocking, one of the best chiplets heats up more (by about 10C). Downvolt through curve does not help, because after that, the processor simply raises the boost frequency even higher when it sees the potential for this, i. E. as a result, the voltage does not decrease, but remains the same, but the frequency is higher, to reduce heating, you need to accelerate the multiplier with a fixed voltage and frequency, then you can control the temperature. I got out of the situation by limiting the temperature limit to 80C in the BIOS and making a downvolt on all cores -10, almost without losing performance (22300 in Cinebench R23). Gotcha Stepping B2. Paired with motherboard ASUS Rog Strix B550-F Gaming Wi-Fi, bios
Glarks 660 Pieces Phillips Assortment Motherboard
10 Review
🖥️ Helifouner 450-Piece Computer Standoffs Spacer Screws Kit: Ideal for Hard Drive, Motherboard, Fan, Power Graphics & Computer Cases
10 Review
M.2 Screw Kit: Easy Mounting for NVMe SSDs on ASUS Motherboards
19 Review
Comprehensive 500pcs Laptop Screw Kit Set for 🔩 IBM HP Dell Lenovo Samsung Sony Toshiba Gateway Acer
12 Review