Review on 🚚 Reese Strait-Line (66074) 1,200 lb Trunnion Style Weight Distribution Kit: Enhanced Towing Stability and Safety Solution by Nick Andep

I bought this to replace my double friction rods and WD system. Installation was pretty easy for me, I read all the instructions and watched a lot of installation videos. I had to purchase a step drill to make the correct size holes for the cam arm mounts. Be careful not to make these holes too big, mine was spot on but I would have liked a little tighter. Also, ALWAYS tighten the self-tapping screws as specified. I wasn't sure if I was doing it right thinking they would just scrape and twist in the hole but that should happen it would break the nut on the inside of the trailer frame so it could never be removed. then it is tightened and can be twisted. It can also be a little tricky to adjust the cam arm nut, there isn't much room to adjust it but take your time and get it right. I also had to relocate my detachable cable box that was installed on the bottom of the A-Fram where the new cam arm mounts will mount, although it's not that heavy. I noticed a big improvement in handling after installation. I have a 28 foot Jayco and on my first ride I was hit by a 60 mph cross wind. I saw the storm coming and slowed down, but I had no problem swaying as long as I found a safe place to stop and weather the storm.