Review on J-Tech Digital 1X2 Wireless HDMI Extender 200ft: Full HD 1080p, Dual Antenna, HDMI Loop Output, IR Passthrough – Receiver (1080P 200ft) by Mario Haan

I first bought a transceiver kit to try at our church and sent a 70ft line and they worked great. I then bought two receivers and streamed to a projector above the altar and to a TV in the foyer behind a soundproof brick wall and was initially pixelated, but after adjusting the transmitting and receiving antennas it was all three (2 TVs and a projector) . Broadcast in full 1080p resolution. The televisions are 70 feet from the field line and 85 feet behind the brick wall, and the projector is about 30 feet from the field line. I called J-Tech tech support and confirmed that they cannot guarantee transmission to 3 receivers but I would say if you have an unobstructed signal to all 3 they will. If there is an obstacle, try to locate the transmitter and position the antenna (external antenna extension base included for added flexibility and better signaling around obstacles), this solved my problem fairly quickly. I'm so happy to complete the installation and implement this solution in our church and I don't have to run unsightly cables long distances through the sanctuary, plus HDMI is limited to about 50 feet and other wiring standards require converters anyway. Radio transmission and reception is the key to a clean, professional-looking installation of communications equipment. My only wish is that J-Tech would offer a transmitter that broadcasts to more than 2 or 3 receivers. I need to stream to 2 more TVs and am trying to avoid HDMI splitters and long cables. Bottom line, solid, well-made devices in a metal case (don't forget open vents at the bottom and top to allow air to flow through the devices) and connect automatically every time.