Review on Upgrade your towing experience with PullRite 331707 Rubber Cushion Capture Plate for enhanced stability and reduced wear by Matt White

Plate appears to be of good quality when finally installed and works as intended. However, it did not fit perfectly with my MORryde coupling bolt. It was the correct size, but the product's "curves" did not exactly match the curves on the MORryde plate. The two bolts at the rear end could be screwed in, but the plate at the opposite end did not rise far enough to insert the two front bolts. I finally solved this problem by tightening the back screws just enough to hold the plate firmly in place. Then I drove my truck and clamped under the plate like I was hanging it on. After raising the front legs of my fifth wheel, the heavy weight of the van pushed the plate into place, allowing me to climb onto the truck bed and insert the front pins. I was then able to lower the RV's legs and tow my truck. Now I was finally able to properly tighten and tighten all four screws. (I'm 69 years old and I was able to complete the installation without help, but it took about an hour.)