Review on GIGABYTE GeForce Graphics WINDFORCE GV N308TEAGLE 12GD by Adam Kulesza ᠌

So. In order for the card to be PERFECT, exactly beautiful, you need to change the thermal pads, thermal paste and undervolting. Thermal pads: Go to aliexpress, drive in ThermalRight Odyssey and take 3 different pieces (1 piece 85x45x2.0mm for memory chips, 1 piece 85x45x3.0mm for the backplate, and 1 piece 85x45x1.5mm or 85x45x1.0mm (I got 1.5mm, comrade 1.0 mm) for everything else). And the temperature will drop to sane 75-80 degrees in the load). Thermal paste: everything is just Arctic Cooling MX-4 (2022) and everything will be fine. And the most interesting thing is undervolting: Watch a better video on how to do it. In the end, everything turned out to be very simple. With a power limit of 85%, it was possible to make 1710 MHz at 800 MV. BUT! The temperature was between 60 and 70 degrees. And then 70 only in cyberpunk, in other games 60-65. GONE THROTTLE SPEECH! And they squeaked like the last creatures at more than 100 frames. Plus she's quiet! Yes, I know it's not much, but for the sake of comparison, I ran it up to 1900 MHz and got a difference of 5 frames (95 and 90). But the temperature is 85 and the squeak of the throttles. I think you can sacrifice 5 frames for the sake of a small temperature, silence and the absence of a squeak of throttles. Unfortunately, there were no photos of tests before opening the card, but believe me, I would not bother so much if the card was in order.