Review on Keyless Remote Lincoln Mercury CWTWB1U793 Car & Vehicle Electronics for Car Electronics by Jeff Bundrick

Bought a 2007 Ford Fusion as a whipping car aka a second everyday car came with a key no remote bought it the locksmith cut the keys home used my key programmer and programmed the immobilizer works like a charm as i had 3 keys i just lost all the keys so i only know 3 keys programmed to the car then i adjusted the remote key fob works like 123 /abc if these keys don't work for you then you bought the wrong keys, they aren't keys, read the description to see if it fits your car before wasting your time and writing bad reviews. For those who want to know how to program the remote control, carefully follow these steps: 1. Close all doors, then open the driver's door and press the unlock button on the driver's door while it is open, insert the key in the ignition . RUN 8 times within 8 seconds, from the 8th t time ends with RUN. The door locks go through the programming mode. (If the door locks do not lock, it has been done incorrectly. You must start over by removing the key and starting from step 1) (OFF is the position where you can remove the key and RUN is the position where you're about to start.) 3. Within 10 seconds, press any button on the first keyless remote to be programmed. The door locks will be cycled through to confirm the programming. If you only have one remote control, skip to step 5.4. Press any button on the second keyless remote within 10 seconds. The door locks will click again to confirm the programming. Repeat step 4 for all other remote controls. 5. Turn off the ignition. The locks will work again and indicate the end of programming mode.* If this does not work, try with the door closed.