Review on Hillman 121158 Flush Picture Hangers by Kelsey Brown

This is a secure mount. You need an identical pair in each package to mount a painting, for example. The hanger should be on the wall and the hanger should be on the picture frame. When connected together, the thickness is only two metal plates. I doubt this is best for paintings as you can't adjust the picture level after the screws are screwed in. Therefore, the hangers must be properly installed in the correct position. Drilling pilot holes can help. In addition, the frame for the picture should have enough wood thickness for the screws. If a pair of hangers in the middle of a picture or mirror is not enough, attaching two pairs of hangers at each corner will be more difficult. Holes for screws on hangers almost along the edges of the hairpin. So I screw one side of the bail into the middle of the bobby pin. The other side attaches to the drywall. I'm tired of buying these things at the local hardware store. Although they are available on the site, you cannot find them. If they don't make a profit, you can't find them yourself. When I order online and then pick up, they call me several times from the store and ask if I want to replace items that end up in stock. Although they are available on the site, you cannot find them. If they don't make a profit you can't find them yourself. When I order online and then pick up, they call me several times from the store and ask if I want to replace items that end up in stock. Although they are available on the site, you cannot find them. If they don't make a profit, you can't find them yourself. When I order online and then pick up, they call me several times from the store and ask if I want to replace items that end up in stock.