Review on Video card Sapphire Nitro+ Radeon RX 5700 XT 8GB (11293-03-40G), Retail by Janis Berzins ᠌

Name: Video card Sapphire Nitro+ Radeon RX 5700 XT 8GB (11293-03-40G), Retail
Item: Video card Sapphire Nitro+ Radeon RX 5700 XT 8GB (11293-03-40G), Retail
Rating: 5

May 13, 2023

Best price for this product, will buy more!

We have significantly more than 60fps in 2k on the stock, and with the sapphire trixx software, you can also play with a hardware upscaling of the screen resolution from a smaller one to one of the reference ones (1080,1440,2048) as a result, we have a small loss in quality (well, seriously, it is insignificant) , but significantly increased fps.
Highly recommended setting:
tessellation mode (Use application settings), Optimize surface format - off.
Enthusiasts have something to do - first of all, I definitely recommend lowering the voltage on the core, I found the reference ones for myself - 2022 frequency, 1.040 voltage, powerlimit + 50% (I don’t mind eating), with these settings I had 75 degrees on the core in stress and about 85 in a hot spot. After replacing the body and turntables from 120 to 140, I have 67 degrees in stress and about 79 hotspots (I'm shocked, the body is fractal design meshify C mini)
On the Internet, the guys are measured who will do the most downvolt: the numbers 1900 and 1.000 were very praised.
I took a card with ebay (literally 3 months after purchase by check) from a guy who did not want to suffer with it for 27.5k - this is an excellent price for it, but the current prices of 35k+ are overpriced in my opinion.
My setup:
ryzen 5 2600, 4.0GHz 1.3V
b450 aorus m
corsair vengence lpx 3200 cl16
rx 5700xt nitro+
be quiet! Pure power 11C 700W
adata ssd 500 GB
wd green for 1 TB

Pros

- Design, nitro+ fan by sapphire - Added LGBT highlight for the suffering - One of the best air cooling systems - Very quiet - Reducing core voltage increases card efficiency and lowers temperatures

Cons

- You must have an initial level of shamanism - Drivers: you need to find your driver, on which it works stably for you and forget about ates for a while (. Everything is ok on the latest firewood) - DX11 cannot load the card to full, loading hangs around 80% (In DX12 or Vulkan, the vidyuha is hammered at 98% even with my ryzen 5 2600) - I had to cheat because the core voltage jumped between 0.8 and configured 1.04 To do this, I simultaneously ated all the drivers: both motherboards, and vidyuhi, and Windows, just in case. But in my opinion, in the end, the DC voltage boost setting in msi afterburner ended up fixing it.