Review on Aerocool Bolt Mini PC MicroATX - Side Window - RGB 13 - 12cm Fan by EN Tien ᠌

In general, the purchase is satisfied. Now even the aquarium is not needed. You sit, admiring the blinking lights of the motherboard and other parts inside the case. During assembly, there may be problems with cable management. The case is small, you yourself must understand. In my case, I had to press a little on the back cover to close it. Another problem that can scare away is the lack of synchronization with the motherboard (if it supports such functionality). And even soldering will not help here. There are 4 wires going to the tape, 2 of which are power, and the other 2 are a button for switching modes. The microcontroller is soldered into the tape itself. So if you want to synchronize the backlight with the motherboard, you will have to completely replace the LED strip with your own. You will most likely need to solder. There are no dust filters on the front wall. So when you take fans to the front wall, do not forget to buy filter grilles for them. I don’t see the point in taking a dense filter, the case is small, the air is not as good as in a large case, and a dense filter will only worsen the air flow. Although now, even with 1 fan on the rear wall, there are no problems with cooling. Which is a little surprising. Maybe it's not summer yet or I'm not running my system hard enough?