Review on 💎 High-capacity Glass Polishing Compound 60150 by Kyle Herrera

Product does what it promises, just takes a long time as everyone says. Schedule 4 hours if you want to do a very good job, at least that's my experience, to each his own. Some instructions as there are none or none on the internet. 1. Thoroughly clean the windshield, plain water and a towel are enough.2. Shake the bottle before use 3. Place small drops of the product into the glass (depending on your application decision), they should usually be about a quarter sized4. Add a good layer of water, just enough for the water itself to become a "glassy layer" (the reason being that I've found that using less water will "burn out" and become ineffective, while using less amount of water turned out to be just dirty) Water helps as a lubricant and is a "heating agent" like polishing a car, glass does not retain heat well and therefore keeps a constant "training agent" around when Twisting and turning to help heating is required.5. Continue using the same "layering" method, running the water over the same areas, adding more polish as needed6. After several passes (10-15) wipe the surface with water and a cloth and check if the result is as desired7. If not, repeat the previous steps 3-6 until you get the desired result.