Review on 🔧 Efficient and User-Friendly Manual Epoxy Applicator Gun 6 75 by Onsommoshit Mathews

However, the well designed unit does not work with 1:1 cartridges, although it says it is rated for a 200ml combination. Piston to grind it under the cartridge, but immediately tear off the screw heads. I had to grind in place, which allowed some access with a bench grinder to grind down half of the butt, even after removing the handle assembly. I had to use a dremel to sand down the rest of the bottom bracket and pushers as best I could. In the end it worked, but the larger piston got stuck in the tube because I couldn't grind it any further. I ended up wasting half a tube of epoxy because I had to cut it out. my fault However, I think it's also not clear that the pistons are different sizes or why there isn't an adapter to enlarge a smaller piston if needed. Even their 1:1 device has 2 different sized pistons and does not state the piston sizes in the ad nor in the explanation of the difference. .Did it work? Like, like, something like.