Review on Mount Motorcycle Clutch Reservoir 1 Inch by Alif Wills

Fits well and seems solid after going to the hardware store and buying some stainless steel washers and galvanized steel bushings that are the right size. I used 1/2" LX 1/4" ID steel bushings secured with #12 stainless steel washers that I placed under the lock washer on the bolt head and on the other side of the bracket body so the steel bushing was pressing against it. The holes in the mount body fit loosely with the included screw heads and lock washers. The supplied plastic bushings do not fit into the OEM handlebar clamp or ram mount threaded holes. The steel bushing I bought was the same outside diameter as the OEM bolt head that attached the master cylinder to the handlebar. This matched the handlebar clamp perfectly, eliminating the need for a washer etc on that end. In the end it will do its job well, it just needs a little more in the hardware department.